Most Popular Door Accessories
See All Door Hardware Brands >>
Most door hardware products are design to fit standard door preparation as illustrated on the left. If you have something different, please start with our hardware replacement guide at the link below.
Part Numbers for Emtek Sandcast Teton Lever with Style 3 Rosette
Passage Set - 7104TTPrivacy - 7204TTDummy - 7054TT
How to Order Emtek Sandcast Bronze Teton Lever Handles with Style 3 Rosette
Emtek's Sandcast Bronze Teton door Levers with Style 3 rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Rustic Living collection of door hardware gives an authentic look and feel to your casual space. Cast bronze hardware is produced using ancient sand casting methods which demonstrates the richness of the material through its rough natural details. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.
Rosette Options. The Emtek Sandcast Teton Lever Handles are available with several rosette options so you can create your own custom look.(what is a rosette?) Show me the Sandcast Bronze Teton Lever with other rosette options
Finishes. With four finishes to choose from Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come. *some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, these finishes have limited or no warranty
Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.
Emtek Sandcast Bronze Teton Lever Handle with Style 3 Rosette Specifications
- Complete set. Includes lever handles and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware. - Shipped with Mortised tubular latch (drive-in latches are available upon request) - Standard door preparation - Shipped with square corner mortise plates and strike plate. Rounded corner available upon request. - Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets. - Installation instructions included in packaging.
You can upgrade the Emtek Sandcast Bronze Teton Lever Handlewith Style 3 Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch.
Emtek Sandcast Bronze Teton Levers with CF upgrade.
Don't forget your...
Emtek Deadbolts >>
Emtek Handlesets >
Emtek Keyless Locks >>
Emtek Multi Point Trim >>
Emtek Door Hinges >>
Emtek Bath Hardware >>
Whats Included in Your Emtek Sandcast Bronze Teton Door Lever
Passage Door Lever Contents A Lever for both sides of the door, latch mechanism, strike plates and mounting screws.
Privacy Door Lever Contents A Lever for both sides of the door, latch mechanism, generic unlocking tool, strike plates and mounting screws. Double Dummy Lever Handles Two non functioning levers and mounting screws for surface mounting.
Note: Emtek door hardware is shipped standard with square corner strike and faceplates. Rounded corner strike and faceplates are available upon request. Drive in latches also available upon request.
Emtek Sandcast Bronze Teton Lever Handle Functions
Emtek Lever Handles are available in several functions. Please review the descriptions below so you can order the correct door lever for your application.
Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.
Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.
Measurements for Emtek Teton Lever with Style 3 Rosette