Need Help? We're Here Mon-Fri 9-5 Mtn Time: 307-886-9449
Or text 307-275-9700
SKU :E733
Emtek Old Town Clear Knob with Regular Rosette
Custom assembled. Please allow 10-14 business days before shipping. Leadtime may fluctuate due to COVID delays. Call 307-886-9449 to expidite.

Emtek Old Town Clear Knob with Regular Rosette

1 Review(s) Write a Review Write a Review
Emtek Old Town Clear Knob with Regular Rosette
Emtek Old Town Clear Knob with Regular Rosette

Helpful Information

Fits Standard Door Preparation Door Hardware Preparation
    - 2 1/4" tall standard strike

Part Numbers

Part Numbers for Emtek Old Town Clear Crystal with Regular Rosette

Passage Set - 8100OT
Privacy - 8200OT
Dummy - 8050OT


Emtek Old Town Clear Knob with Regular Rosette

Emtek's Old Town Clear knob blends a classic looking knob with a simple, round Regular rosette. Available in multiple finishes to coordinate with your home's decor.

Emtek Door Knob Specs

- Fits standard door Prep.
- Available with 2 3/8" or 2 3/4" Backset (Non-Adjustable, Must Specify when ordering).
- Solid brass rosettes.
- Privacy locks function using a rosette push pin on the interior and pin hole exterior for emergency unlocking.
- Available with square or radius corner strike and faceplates. Drive in Latches also available.
- Concealed Faster or CF Mechanism upgrade is a different mounting type that will have no exposed mounting screws.

In the Box

What comes with the Emtek Old Town Clear Knob?

Passage and privacy sets will come with knobs and rosettes for both sides of the door, along with a latch, strike and faceplates and mounting screws required.

Dummy Sets are surface mounted knobs or levers, which means that they will not have a latch mechanism or strike plates. Dummy sets are meant to be installed on the surface of the door using the mounting plate and screws provided. If you door already has a hole bored in it, the dummy function is not what you would want to order.

Choose Options:

SKU :E733
Function help
Select Backset help
Door Thickness help
Strike and Faceplate Type help
Latch Type help
Retail Price: $145.00
Price (USD)$121.80

Custom assembled. Please allow 10-14 business days before shipping. Leadtime may fluctuate due to COVID delays. Call 307-886-9449 to expidite.

Order Help

Emtek Door Knob Functions

Emtek door knobs are available in several functions. Please review the descriptions below so you can order the correct door door knob for your application.

Passage Door Knob Function Emtek Passage or Hall and Closet Door Knobs are used on doors that do not require a locking mechanism. Halls, closets, pantry or laundry doors will generally use a passage knobset. Passage door knobs do not have a locking mechanism.

Privacy Door Knob Function Emtek Privacy or Bed and Bath Door Knobs are most often used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Emtek privacy door knobs have a push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some door knobs will have a pin hole inside a circular piece, some just have a small pinhole.

Double Dummy Door Knob Function Emtek Double Dummy Door Door Knobs are sold in pairs. Dummy door knobs do not have a latch or mechanism of any kind. These door knobs are surface mounted to a door that has not been bored (large hole cut out) for a door knob. Dummy doorknobss are generally used on double doors that us a ball catch at the top to keep them closed so a latch is not required. They are also commonly found on the inactive side of a french door - a single dummy mounted on either side of the inactive door.

Emtek Keyed
Door Knobs
Not all Emtek door knobs are available in a keyed function. For your exterior doors you may consider and Emtek passage knob used with an Emtek deadbolt above, or and Emtek Sideplate Lock which incorporates the door knob and deadbolt with one larger decorative backplate. See available Emtek Keyed Entry Knobs.


Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.


Measurements for Emtek Old Town Clear Knob with Regular Rosette

Emtek Old Town Clear Knob with Regular Rosette Measurements

Recently Viewed Hardware

Customer Reviews

5 Stars
Interior Designer
This is a beautiful high quality door knob, bought it for a new door in the kitchen of my 1916s home to closely match the original door knobs in the house, but this one is really way nicer than the antique ones both in quality and looks.
Did you find this helpful? 
Reviewed by:  from Tampa. on 2/27/2018

Questions and Answers

Question how may i select "concealed hardware" and "rope rosette"?
Asked by: peter - 8/11/2018
Question You would just go to the old town knob with rope rosette product page. Be sure to choose the CF (concealed screws) option from the menu.

Click here for Emtek Old Town Knob with Rope Rosette" Answer provided by:  Jake (8/13/2018)