Most Popular Door Accessories
See All Door Hardware Brands >>
Most door hardware products are design to fit standard door preparation as illustrated on the left. If you have something different, please start with our hardware replacement guide at the link below.
Part Numbers for Emtek Mercury Lever with 1.5" X 5" Stretto Rosette
Passage- 5801MCPrivacy-5802MCDummy Pair-5803MCSingle Dummy-5804MC
How to Order Emtek Mercury Lever with 1.5" x 3" Stretto Rosette
Emtek's Mercury lever with the 1.5" x 3" Stretto rosette are just what you need for your doors with smaller than standard bore holes. These uniquely beautiful leversets are designed to fit on a modified 1 1/4" bore hole. Be sure to take a look at the diagram below for the exact door prep needed for this hardware. The privacy knobs come with a separate thumbturn for locking your bathroom or bedroom doors.
Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come. Satin brass is a custom finish option and can take longer before being ready to ship out.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty.
Split Finishes. You can order the Emtek Mercury lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.
Emtek Mercury handle with 1.5" x 3" Rosette Specifications
- Complete set. Includes levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware. (Privacy locksets include a separate thumbturn for locking) - Shipped with Mortised 28 degree limited rotation tubular latch - Non-Standard door preparation - Shipped with square corner mortise plates and strike plate. Rounded corner available upon request. - Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets. - Installation instructions included in packaging.
Dont forget your...
Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware
Whats Included with Your Emtek Mercury lever
Passage Lever Contents A lever and chosen rosette for both sides of the door, latch mechanism, strike plates and mounting screws.
Privacy Lever Contents A lever and chosen rosette for both sides of the door, latch mechanism, thumbturn lock, strike plates and mounting screws. Double Dummy Levers Two non functioning levers and chosen rosettes with mounting screws for surface mounting.
Single Dummy LeversOne non functioning knob and chosen rosette with mounting screws for surface mounting.
Note: Emtek door hardware is shipped standard with square corner strike and faceplates. Rounded corner strike and faceplates are available upon request. Drive in latches also available upon request.
Emtek Mercury Lever Functions
Emtek levers are available in several functions. Please review the descriptions below so you can order the correct lever for your application.
Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.
Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.