Emtek Disc Crystal Knob with Sandcast Style 4 Rosette

ID #12730
Write a Review Write a Review
Emtek Disc Crystal Knob with Sandcast Style 4 Rosette
Emtek Disc Crystal Knob with Sandcast Style 4 Rosette - Medium Bronze

Helpful Information

Fits Standard Door Preparation Door Hardware Preparation
    - 2 1/4" tall standard strike  

Details

Part Numbers for Emtek Disc Crystal Knob with Style 4 Rosette

Passage Set - 7100MDC
Privacy - 7200MDC
Dummy - 7050MDC

SKU : E505
Function help
Finish
Select Backset help
Door Thickness help
Strike and Faceplate Type help
Latch Type help
Retail Price: $227.00
$191.82
-
+

Custom assembled. Please allow 7-10 business days before shipping. Expedited options at checkout.
showHelp

Description

Emtek Disc Crystal Knob with Sandcast Style 4 Rosette

Emtek's Disc crystal knob blends the classic look of a vintage crystal style knob with a rustic Sandcast Style 4 Rosette. Available in multiple finishes to coordinate with your home's decor.

Emtek Door Knob Specs

- Fits standard door Prep.
- Available with 2 3/8" or 2 3/4" Backset (Non-Adjustable, Must Specify when ordering).
- Solid brass rosettes.
- Privacy locks function using a rosette push pin on the interior and pin hole exterior for emergency unlocking.
- Available with square or radius corner strike and faceplates. Drive in Latches also available.
- Concealed Faster or CF Mechanism upgrade is a different mounting type that will have no exposed mounting screws.
- Sandcast finishes are living finishes and are not warrantied as they are intended to wear/change with use and age.

In the Box

What comes with the Emtek Modern Disc Crystal Knob?

Passage and privacy sets will come with knobs and rosettes for both sides of the door, along with a latch, strike and faceplates and mounting screws required.

Dummy Sets are surface mounted knobs or levers, which means that they will not have a latch mechanism or strike plates. Dummy sets are meant to be installed on the surface of the door using the mounting plate and screws provided. If you door already has a hole bored in it, the dummy function is not what you would want to order.

Order Help

Emtek Door Knob Functions

Emtek door knobs are available in several functions. Please review the descriptions below so you can order the correct door door knob for your application.

Passage Door Knob Function Emtek Passage or Hall and Closet Door Knobs are used on doors that do not require a locking mechanism. Halls, closets, pantry or laundry doors will generally use a passage knobset. Passage door knobs do not have a locking mechanism.

Privacy Door Knob Function Emtek Privacy or Bed and Bath Door Knobs are most often used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Emtek privacy door knobs have a push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some door knobs will have a pin hole inside a circular piece, some just have a small pinhole.

Double Dummy Door Knob Function Emtek Double Dummy Door Door Knobs are sold in pairs. Dummy door knobs do not have a latch or mechanism of any kind. These door knobs are surface mounted to a door that has not been bored (large hole cut out) for a door knob. Dummy doorknobss are generally used on double doors that us a ball catch at the top to keep them closed so a latch is not required. They are also commonly found on the inactive side of a french door - a single dummy mounted on either side of the inactive door.

Emtek Keyed
Door Knobs
Not all Emtek door knobs are available in a keyed function. For your exterior doors you may consider and Emtek passage knob used with an Emtek deadbolt above, or and Emtek Sideplate Lock which incorporates the door knob and deadbolt with one larger decorative backplate. See available Emtek Keyed Entry Knobs.

Other

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

Measurements

Measurements for Emtek Disc Crystal Knob with Sandcast Style 4 Rosette

Emtek Disc Crystal Knob with Sandcast Style 4 Rosette Measurements

Recently Viewed Hardware

Hello Guest, Login Hello Guest! Logout
Information