Posted by DDH Staff on 5/21/2012 to
Tips
The EGS ORIGINAL Adjustable Door Hinges take care of a lot of problems you may be having with your door sticking or when your door is hard to open and close. Some of the reasons your door is sticking may be:
- Settling of your home
- Foundation concerns
- Too many layers of paint
- New flooring installation
- Expansive soil conditions
- Poor craftsmanship
- Moisture
- Humidity
You may have fixed or have been planning to fix the problem, but it could happen again! But not anymore with the Original Adjustable Hinge...
With the EGS ORIGINAL Adjustable Door Hinges, you don't need to spend hours and hours having to take down your door and measure, plane, cut, sand, re-finish and re-hang! BLECK! You can forget all of those problems, just by installing these hinges and a few turns with a wrench or pliers. It can be adjusted up or down 1/4" in either direction, or 3/16" side to side. These hinges are sold in a set of 3.Click Here For a Video on How it Works!
There are several different styles and sizes to choose from. Check out the 4" or 3.5" sizes, square corner, round corner or square and round corner, and there are also several finishes to choose from. [gallery columns="4"]Even check out how to install the EGS ORIGINAL Adjustable door hinges by clicking here!
Problem solved. Fantastic!
0 Comments
Jon Allan
Date
9/13/2019
Need a 4" adjustable door hinge. Where can I buy them (3) in Greensboro NC? Thanks.
Mike Becker
Date
2/1/2020
Do you have these in stock?
Mike
Date
11/16/2020
I have French door and the door on the left is a bit higher than the right, about 1/4” I need the adjustable door hinges in 3.5” brushed nickel Where can I find them to purchase? I have a large door with 4 hinges on each door with 6 holes per Mike
lewis mcsparen
Date
2/21/2021
How do I order 3.5 inch adjustable door hinges, I need 6 of them ( preferably in oil rub bronze or black
Ralph Van Fleet
Date
3/24/2021
How do I buy the original adjustable door hinge? I need three.
Kerry Love
Date
4/28/2022
Can you tell me what type hinge restrictor clips I need for EGS soft close hinges? The ones we have open to just over 90°, and I need less than 90°. Thanks

