Door Levers

Omnia door levers are available in several functions, including passage levers, privacy levers, pair dummy levers, and single dummy levers. Omnia passage levers operate by lever from either side of the door. These levers don't lock and use 8 mm solid spindles. Omnia privacy levers operate by lever from either side of the door as well, but on the interior of the door there is a push button to activate privacy. Turning the lever from inside will deactivate privacy and retract the lever's latchbolt, but there is also an emergency pin hole on the exterior of the door. These privacy levers use 8 mm split spindles and are recommended for your bathroom and/or your bedroom doors. Omnia pair dummy knobs are trim on both sides of the door that have neither latch nor strike. Omnia single dummy knobs are trim on one side of the door only, again without latch or strike.

All Omnia door levers are ADA (Americans with Disabilities Act) approved, providing equality and accessibility to all people. They also feature concealed screw rosettes, giving your door a finished, high end look. Omnia offers a variety of finish options for its door levers, but if you're looking for a finish that is low maintenance, look no further than our stainless steel. Omnia's stainless steel requires little attention, and under normal circumstances, it will not tarnish or corrode. To make sure your finish doesn't undergo damage, keep an eye on what chemical and environmental factors you expose the finish to over time. The possibility of surface oxidation is not a defect in the stainless steel, but a reaction on the surface of the finish with the chemical environment which can be removed with a stainless steel polish.