Posted by DDH Staff on 10/10/2023 to Tips

Multi-point patio locks are a little more complex than your regular front door lock set, so you’ll want to make sure you know how to complete patio door lock trim replacements properly. The multi-point mechanism have 3 different points where a bolt will come out of the door to lock inside part of the door jamb - the top, bottom, and the side of the door, just like any basic door lock. So for today’s blog post, we will go over patio door lock trim replacements with Emtek patio trim door hardware.

Emtek Multi Point Hardware

Please note that we do not carry replacements for the Marvin Integrity interior locking mechanism. The Emtek multi-point hardware includes only the handle and plate (for the interior and exterior of the door), and keyed cylinders (where applicable) that are mounted to the door and attached to the existing mechanism. The mechanism is installed with your Marvin Integrity door, which is probably a great thing because I'm not sure how easy that would be to install.

Multi Point Patio Locks and Hardware

Multi-point patio locks are advanced security systems designed for sliding or swinging patio doors. These locks engage multiple points along the door's edge, distributing force and thwarting break-in attempts. The reason these locks are a must-have is mainly for the security factor – it has three locking bolts compared to one. They often include key locks or electronic components, so they offer comprehensive security and insulation benefits. In addition to how well they function, multi point patio hardware is also chosen for the versatile style options.

Patio Door Lock Replacements

But what happens when you need patio door lock trim replacements due to broken hardware? Maybe you’re just wanting a simple upgrade. Well, Marvin Integrity provides doors with a multi-point mechanism and some door hardware. We give you the option of more styles for your Marvin Integrity doors. So, if you want to replace your old hardware with something new, you will want to check the configuration page or look at the image below.

Configuration 1 Diagram

You will want to make sure the measurements of your existing mechanism match up with this configuration before you order. After you have found that it does match, check out all the different designs from Emtek you can choose from, under Emtek multi point locks. There are many options, and the best way to start is by first picking the plate you like and then going to the page because there are even more levers to choose from that will go with that plate – check under the description box on the page of the plate you chose.