Emtek Modern Sideplate

NOTE: Keyed functions require a 5 1/2 " CC bore measurement. This means from the center of the deadbolt hole to the center of the door knob hole should measure 5 1/2".

• 5-1/2" door prep required.
• Schlage C Keyway.
• Door handing required when ordering,
• Choose from many lever and knob styles and several finishes.
• Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
• Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
• Choose between standard 2 3/8" or 2 3/4" backsets.

Emergency Egress: Handleset which retracts the latchbolt and deadbolt simultaneously when the inside knob/lever is turned. Door will remain unlocked unless locked with a key.

Cartridge: Case and interior working parts are formed of heavy gauge steel, zinc chromate plated and lubricated for maximum strength and smooth operation

Solid Forged Brass: Entrance handle, cylinder collar, knob, rose, and turn piece are manufactured of solid forged brass for maximum strength and durability.

Installation: Images lock sets are designed fo easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation fast.

Door Thickness : Lock sets accomodate a door thickness of 1-3/4". Conversion kit available for 2" and 2-1/4" thick door.

Case: Deadbolt and latch case are formed of steel for strength. Most interior parts are made of solid brass or steel for maximum strength and smooth operation.

Backset: Adjustable backset 2-3/8" or 2-3/4" latch and deadbolt supplied standard.

Faceplate: Deadbolt and latch are supplied with a 1"(25mm) faceplate.

Strike: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ulimate strength and durability. The strike is installed with two 3" security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. The 3" screws securing the inside face of the double cylinder deadbolt resist tampering and guard against theft. Latches are supplied standard with a box strike

Bolt: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1" throw when extended and a hardened steel insert for maximum security and protection. Latch bolt has a .5" throw when extended to fully engage the door jamb.

Fully Reversible: Accomodates most door conditions and facilitates installation.

Distance Between Center of Latch and Deadbolt(CTC): Lockset accommodates 5-1/2" center-to-center dimension ONLY.

Cylinder: Cylinder supplied with 5-pin keying.

Keying: All keyed entry products are available keyed alike.

Door Prep: Designed to fit 2-1/8" face bore with no additional hardware.

Important: Emergency egress entrance lock sets are designed for use with all Images knobs or levers.

Available Finishes
003 Lifetime (PVD)Polished Brass	030 Polished Brass	031 Non-Laquered Polished Brass
050* Satin Brass and Black	055 Lifetime (PVD) Polished Nickel	056 Lifetime (PVD) Satin Nickel
102 Oil Rubbed Bronze	112* Venetian Bronze	150 Satin Nickel
151* Antique Nickel	190 Satin Black	260 Polished Chrome
264 Satin Chrome	402 Distressed Oil Rubbed Bronze	412* Distressed Venetian Bronze
452* Distressed Antique Nickel

* Hand-relieved finish variances: Product finishes which are HAND-RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.

Emergency Egress: Handleset which retracts the latchbolt and deadbolt simultaneously when the inside knob/lever is turned. Door will remain unlocked unless locked with a key.

Cartridge: Case and interior working parts are formed of heavy gauge steel, zinc chromate plated and lubricated for maximum strength and smooth operation

Solid Forged Brass: Entrance handle, cylinder collar, knob, rose, and turn piece are manufactured of solid forged brass for maximum strength and durability.

Installation: Images lock sets are designed fo easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation fast.

Door Thickness : Lock sets accomodate a door thickness of 1-3/4". Conversion kit available for 2" and 2-1/4" thick door.

Case: Deadbolt and latch case are formed of steel for strength. Most interior parts are made of solid brass or steel for maximum strength and smooth operation.

Backset: Adjustable backset 2-3/8" or 2-3/4" latch and deadbolt supplied standard.

Faceplate: Deadbolt and latch are supplied with a 1"(25mm) faceplate.

Strike: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ulimate strength and durability. The strike is installed with two 3" security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. The 3" screws securing the inside face of the double cylinder deadbolt resist tampering and guard against theft. Latches are supplied standard with a box strike

Bolt: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1" throw when extended and a hardened steel insert for maximum security and protection. Latch bolt has a .5" throw when extended to fully engage the door jamb.

Fully Reversible: Accomodates most door conditions and facilitates installation.

Distance Between Center of Latch and Deadbolt(CTC): Lockset accommodates 5-1/2" center-to-center dimension ONLY.

Cylinder: Cylinder supplied with 5-pin keying.

Keying: All keyed entry products are available keyed alike.

Door Prep: Designed to fit 2-1/8" face bore with no additional hardware.

Important: Emergency egress entrance lock sets are designed for use with all Images knobs or levers.

Available Finishes
003 Lifetime (PVD)Polished Brass	030 Polished Brass	031 Non-Laquered Polished Brass
050* Satin Brass and Black	055 Lifetime (PVD) Polished Nickel	056 Lifetime (PVD) Satin Nickel
102 Oil Rubbed Bronze	112* Venetian Bronze	150 Satin Nickel
151* Antique Nickel	190 Satin Black	260 Polished Chrome
264 Satin Chrome	402 Distressed Oil Rubbed Bronze	412* Distressed Venetian Bronze
452* Distressed Antique Nickel

* Hand-relieved finish variances: Product finishes which are HAND-RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.

Emergency Egress: Handleset which retracts the latchbolt and deadbolt simultaneously when the inside knob/lever is turned. Door will remain unlocked unless locked with a key.

Cartridge: Case and interior working parts are formed of heavy gauge steel, zinc chromate plated and lubricated for maximum strength and smooth operation

Solid Forged Brass: Entrance handle, cylinder collar, knob, rose, and turn piece are manufactured of solid forged brass for maximum strength and durability.

Installation: Images lock sets are designed fo easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation fast.

Door Thickness : Lock sets accomodate a door thickness of 1-3/4". Conversion kit available for 2" and 2-1/4" thick door.

Case: Deadbolt and latch case are formed of steel for strength. Most interior parts are made of solid brass or steel for maximum strength and smooth operation.

Backset: Adjustable backset 2-3/8" or 2-3/4" latch and deadbolt supplied standard.

Faceplate: Deadbolt and latch are supplied with a 1"(25mm) faceplate.

Strike: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ulimate strength and durability. The strike is installed with two 3" security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. The 3" screws securing the inside face of the double cylinder deadbolt resist tampering and guard against theft. Latches are supplied standard with a box strike

Bolt: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1" throw when extended and a hardened steel insert for maximum security and protection. Latch bolt has a .5" throw when extended to fully engage the door jamb.

Fully Reversible: Accomodates most door conditions and facilitates installation.

Distance Between Center of Latch and Deadbolt(CTC): Lockset accommodates 5-1/2" center-to-center dimension ONLY.

Cylinder: Cylinder supplied with 5-pin keying.

Keying: All keyed entry products are available keyed alike.

Door Prep: Designed to fit 2-1/8" face bore with no additional hardware.

Important: Emergency egress entrance lock sets are designed for use with all Images knobs or levers.

Available Finishes
003 Lifetime (PVD)Polished Brass	030 Polished Brass	031 Non-Laquered Polished Brass
050* Satin Brass and Black	055 Lifetime (PVD) Polished Nickel	056 Lifetime (PVD) Satin Nickel
102 Oil Rubbed Bronze	112* Venetian Bronze	150 Satin Nickel
151* Antique Nickel	190 Satin Black	260 Polished Chrome
264 Satin Chrome	402 Distressed Oil Rubbed Bronze	412* Distressed Venetian Bronze
452* Distressed Antique Nickel

* Hand-relieved finish variances: Product finishes which are HAND-RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.

Emergency Egress: Handleset which retracts the latchbolt and deadbolt simultaneously when the inside knob/lever is turned. Door will remain unlocked unless locked with a key.

Cartridge: Case and interior working parts are formed of heavy gauge steel, zinc chromate plated and lubricated for maximum strength and smooth operation

Solid Forged Brass: Entrance handle, cylinder collar, knob, rose, and turn piece are manufactured of solid forged brass for maximum strength and durability.

Installation: Images lock sets are designed fo easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation fast.

Door Thickness : Lock sets accomodate a door thickness of 1-3/4". Conversion kit available for 2" and 2-1/4" thick door.

Case: Deadbolt and latch case are formed of steel for strength. Most interior parts are made of solid brass or steel for maximum strength and smooth operation.

Backset: Adjustable backset 2-3/8" or 2-3/4" latch and deadbolt supplied standard.

Faceplate: Deadbolt and latch are supplied with a 1"(25mm) faceplate.

Strike: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ulimate strength and durability. The strike is installed with two 3" security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. The 3" screws securing the inside face of the double cylinder deadbolt resist tampering and guard against theft. Latches are supplied standard with a box strike

Bolt: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1" throw when extended and a hardened steel insert for maximum security and protection. Latch bolt has a .5" throw when extended to fully engage the door jamb.

Fully Reversible: Accomodates most door conditions and facilitates installation.

Distance Between Center of Latch and Deadbolt(CTC): Lockset accommodates 5-1/2" center-to-center dimension ONLY.

Cylinder: Cylinder supplied with 5-pin keying.

Keying: All keyed entry products are available keyed alike.

Door Prep: Designed to fit 2-1/8" face bore with no additional hardware.

Important: Emergency egress entrance lock sets are designed for use with all Images knobs or levers.

Available Finishes
003 Lifetime (PVD)Polished Brass	030 Polished Brass	031 Non-Laquered Polished Brass
050* Satin Brass and Black	055 Lifetime (PVD) Polished Nickel	056 Lifetime (PVD) Satin Nickel
102 Oil Rubbed Bronze	112* Venetian Bronze	150 Satin Nickel
151* Antique Nickel	190 Satin Black	260 Polished Chrome
264 Satin Chrome	402 Distressed Oil Rubbed Bronze	412* Distressed Venetian Bronze
452* Distressed Antique Nickel

* Hand-relieved finish variances: Product finishes which are HAND-RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.

Emergency Egress: Handleset which retracts the latchbolt and deadbolt simultaneously when the inside knob/lever is turned. Door will remain unlocked unless locked with a key.

Cartridge: Case and interior working parts are formed of heavy gauge steel, zinc chromate plated and lubricated for maximum strength and smooth operation

Solid Forged Brass: Entrance handle, cylinder collar, knob, rose, and turn piece are manufactured of solid forged brass for maximum strength and durability.

Installation: Images lock sets are designed fo easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation fast.

Door Thickness : Lock sets accomodate a door thickness of 1-3/4". Conversion kit available for 2" and 2-1/4" thick door.

Case: Deadbolt and latch case are formed of steel for strength. Most interior parts are made of solid brass or steel for maximum strength and smooth operation.

Backset: Adjustable backset 2-3/8" or 2-3/4" latch and deadbolt supplied standard.

Faceplate: Deadbolt and latch are supplied with a 1"(25mm) faceplate.

Strike: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ulimate strength and durability. The strike is installed with two 3" security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. The 3" screws securing the inside face of the double cylinder deadbolt resist tampering and guard against theft. Latches are supplied standard with a box strike

Bolt: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1" throw when extended and a hardened steel insert for maximum security and protection. Latch bolt has a .5" throw when extended to fully engage the door jamb.

Fully Reversible: Accomodates most door conditions and facilitates installation.

Distance Between Center of Latch and Deadbolt(CTC): Lockset accommodates 5-1/2" center-to-center dimension ONLY.

Cylinder: Cylinder supplied with 5-pin keying.

Keying: All keyed entry products are available keyed alike.

Door Prep: Designed to fit 2-1/8" face bore with no additional hardware.

Important: Emergency egress entrance lock sets are designed for use with all Images knobs or levers.

Available Finishes
050* Satin Brass and Black	055 Lifetime (PVD) Polished Nickel	056 Lifetime (PVD) Satin Nickel
102 Oil Rubbed Bronze	112* Venetian Bronze	150 Satin Nickel
151* Antique Nickel	190 Satin Black	452* Distressed Antique Nickel
264 Satin Chrome	402 Distressed Oil Rubbed Bronze	412* Distressed Venetian Bronze

* Hand-relieved finish variances: Product finishes which are HAND-RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.

Emergency Egress: Handleset which retracts the latchbolt and deadbolt simultaneously when the inside knob/lever is turned. Door will remain unlocked unless locked with a key.

Cartridge: Case and interior working parts are formed of heavy gauge steel, zinc chromate plated and lubricated for maximum strength and smooth operation

Solid Forged Brass: Entrance handle, cylinder collar, knob, rose, and turn piece are manufactured of solid forged brass for maximum strength and durability.

Installation: Images lock sets are designed fo easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation fast.

Door Thickness : Lock sets accomodate a door thickness of 1-3/4". Conversion kit available for 2" and 2-1/4" thick door.

Case: Deadbolt and latch case are formed of steel for strength. Most interior parts are made of solid brass or steel for maximum strength and smooth operation.

Backset: Adjustable backset 2-3/8" or 2-3/4" latch and deadbolt supplied standard.

Faceplate: Deadbolt and latch are supplied with a 1"(25mm) faceplate.

Strike: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ulimate strength and durability. The strike is installed with two 3" security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. The 3" screws securing the inside face of the double cylinder deadbolt resist tampering and guard against theft. Latches are supplied standard with a box strike

Bolt: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1" throw when extended and a hardened steel insert for maximum security and protection. Latch bolt has a .5" throw when extended to fully engage the door jamb.

Fully Reversible: Accomodates most door conditions and facilitates installation.

Distance Between Center of Latch and Deadbolt(CTC): Lockset accommodates 5-1/2" center-to-center dimension ONLY.

Cylinder: Cylinder supplied with 5-pin keying.

Keying: All keyed entry products are available keyed alike.

Door Prep: Designed to fit 2-1/8" face bore with no additional hardware.

Important: Emergency egress entrance lock sets are designed for use with all Images knobs or levers.

Available Finishes
050* Satin Brass and Black	412* Distressed Venetian Bronze	056 Lifetime (PVD) Satin Nickel
102 Oil Rubbed Bronze	112* Venetian Bronze	150 Satin Nickel
151* Antique Nickel	190 Satin Black	452* Distressed Antique Nickel
264 Satin Chrome	402 Distressed Oil Rubbed Bronze

* Hand-relieved finish variances: Product finishes which are HAND-RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.

Emergency Egress: Handleset which retracts the latchbolt and deadbolt simultaneously when the inside knob/lever is turned. Door will remain unlocked unless locked with a key.

Cartridge: Case and interior working parts are formed of heavy gauge steel, zinc chromate plated and lubricated for maximum strength and smooth operation

Solid Forged Brass: Entrance handle, cylinder collar, knob, rose, and turn piece are manufactured of solid forged brass for maximum strength and durability.

Installation: Images lock sets are designed fo easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation fast.

Door Thickness : Lock sets accomodate a door thickness of 1-3/4". Conversion kit available for 2" and 2-1/4" thick door.

Case: Deadbolt and latch case are formed of steel for strength. Most interior parts are made of solid brass or steel for maximum strength and smooth operation.

Backset: Adjustable backset 2-3/8" or 2-3/4" latch and deadbolt supplied standard.

Faceplate: Deadbolt and latch are supplied with a 1"(25mm) faceplate.

Strike: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ulimate strength and durability. The strike is installed with two 3" security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. The 3" screws securing the inside face of the double cylinder deadbolt resist tampering and guard against theft. Latches are supplied standard with a box strike

Bolt: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1" throw when extended and a hardened steel insert for maximum security and protection. Latch bolt has a .5" throw when extended to fully engage the door jamb.

Fully Reversible: Accomodates most door conditions and facilitates installation.

Distance Between Center of Latch and Deadbolt(CTC): Lockset accommodates 5-1/2" center-to-center dimension ONLY.

Cylinder: Cylinder supplied with 5-pin keying.

Keying: All keyed entry products are available keyed alike.

Door Prep: Designed to fit 2-1/8" face bore with no additional hardware.

Important: Emergency egress entrance lock sets are designed for use with all Images knobs or levers.

Available Finishes
050* Satin Brass and Black	055 Lifetime (PVD) Polished Nickel	056 Lifetime (PVD) Satin Nickel
102 Oil Rubbed Bronze	112* Venetian Bronze	150 Satin Nickel
151* Antique Nickel	190 Satin Black	452* Distressed Antique Nickel
264 Satin Chrome	402 Distressed Oil Rubbed Bronze	412* Distressed Venetian Bronze

* Hand-relieved finish variances: Product finishes which are HAND-RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.

Emergency Egress: Handleset which retracts the latchbolt and deadbolt simultaneously when the inside knob/lever is turned. Door will remain unlocked unless locked with a key.

Cartridge: Case and interior working parts are formed of heavy gauge steel, zinc chromate plated and lubricated for maximum strength and smooth operation

Solid Forged Brass: Entrance handle, cylinder collar, knob, rose, and turn piece are manufactured of solid forged brass for maximum strength and durability.

Installation: Images lock sets are designed fo easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation fast.

Door Thickness : Lock sets accomodate a door thickness of 1-3/4". Conversion kit available for 2" and 2-1/4" thick door.

Case: Deadbolt and latch case are formed of steel for strength. Most interior parts are made of solid brass or steel for maximum strength and smooth operation.

Backset: Adjustable backset 2-3/8" or 2-3/4" latch and deadbolt supplied standard.

Faceplate: Deadbolt and latch are supplied with a 1"(25mm) faceplate.

Strike: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ulimate strength and durability. The strike is installed with two 3" security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. The 3" screws securing the inside face of the double cylinder deadbolt resist tampering and guard against theft. Latches are supplied standard with a box strike

Bolt: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1" throw when extended and a hardened steel insert for maximum security and protection. Latch bolt has a .5" throw when extended to fully engage the door jamb.

Fully Reversible: Accomodates most door conditions and facilitates installation.

Distance Between Center of Latch and Deadbolt(CTC): Lockset accommodates 5-1/2" center-to-center dimension ONLY.

Cylinder: Cylinder supplied with 5-pin keying.

Keying: All keyed entry products are available keyed alike.

Door Prep: Designed to fit 2-1/8" face bore with no additional hardware.

Important: Emergency egress entrance lock sets are designed for use with all Images knobs or levers.

Available Finishes
003 Lifetime (PVD)Polished Brass	030 Polished Brass	031 Non-Laquered Polished Brass
050* Satin Brass and Black	055 Lifetime (PVD) Polished Nickel	056 Lifetime (PVD) Satin Nickel
102 Oil Rubbed Bronze	112* Venetian Bronze	150 Satin Nickel
151* Antique Nickel	190 Satin Black	260 Polished Chrome
264 Satin Chrome	402 Distressed Oil Rubbed Bronze	412* Distressed Venetian Bronze
452* Distressed Antique Nickel

* Hand-relieved finish variances: Product finishes which are HAND-RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.

Emtek Davos Stainless Steel Handleset Includes:


- Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Schlage C Keyway
- Standard 2 1/8" Bore, 1" Crossbore and 5 1/2" CC door prep.
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.