Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome UL/cUL Listed for three-hour A label doors Meets ADA requirements		Nonhanded through-bolted cylindrical chassis Pressure Release lever stands up to heavy abuse and resists vandalism Double stainless steel compression springs eliminate lever sag Accepts virtually all competitors' standard cylinders and interchangeable cores
Specification for this Commerial Lever:
Door Thickness: 1-3/4"to 2-1/4"standard. Thin door adapter kit (A30775-000-00) vailable for doors thinner than 1-3/4", please specify door thickness. Thicker door locks also vailable, consult factory. Backset: 2-3/4" standard. 2-3/8" and 5" also available. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers vailable when specified, to no cost. 7 pin cylinders also vailable. Cylinder assemblies removable to rekey. Also vailable with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.		Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts. Latches: 1/2" bolt projection, UL listed with latch faceplates 2-1/4" x 1-1/8" with square corners standard. 3/4" projection, UL listed latch with 2-3/4" backset also vailable. Adjustable front standard. Strikes: 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 12 or 24 VAC or VDC. ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1. UL:3 hour A label.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code.

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome UL/cUL Listed for three-hour A label doors Meets ADA requirements		Nonhanded through-bolted cylindrical chassis Pressure Release lever stands up to heavy abuse and resists vandalism Double stainless steel compression springs eliminate lever sag Accepts virtually all competitors' standard cylinders and interchangeable cores
Specification for this Commerial Lever:
Door Thickness: 1-3/4"to 2-1/4"standard. Thin door adapter kit (A30775-000-00) vailable for doors thinner than 1-3/4", please specify door thickness. Thicker door locks also vailable, consult factory. Backset: 2-3/4" standard. 2-3/8" and 5" also available. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers vailable when specified, to no cost. 7 pin cylinders also vailable. Cylinder assemblies removable to rekey. Also vailable with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.		Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts. Latches: 1/2" bolt projection, UL listed with latch faceplates 2-1/4" x 1-1/8" with square corners standard. 3/4" projection, UL listed latch with 2-3/4" backset also vailable. Adjustable front standard. Strikes: 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 12 or 24 VAC or VDC. ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1. UL:3 hour A label.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code.

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome UL/cUL Listed for three-hour A label doors Meets ADA requirements		Nonhanded through-bolted cylindrical chassis Pressure Release lever stands up to heavy abuse and resists vandalism Double stainless steel compression springs eliminate lever sag Accepts virtually all competitors' standard cylinders and interchangeable cores
Specification for this Commerial Lever:
Door Thickness: 1-3/4"to 2-1/4"standard. Thin door adapter kit (A30775-000-00) vailable for doors thinner than 1-3/4", please specify door thickness. Thicker door locks also vailable, consult factory. Backset: 2-3/4" standard. 2-3/8" and 5" also available. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers vailable when specified, to no cost. 7 pin cylinders also vailable. Cylinder assemblies removable to rekey. Also vailable with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.		Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts. Latches: 1/2" bolt projection, UL listed with latch faceplates 2-1/4" x 1-1/8" with square corners standard. 3/4" projection, UL listed latch with 2-3/4" backset also vailable. Adjustable front standard. Strikes: 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 12 or 24 VAC or VDC. ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1. UL:3 hour A label.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code.

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome UL/cUL Listed for three-hour A label doors Meets ADA requirements		Nonhanded through-bolted cylindrical chassis Pressure Release lever stands up to heavy abuse and resists vandalism Double stainless steel compression springs eliminate lever sag Accepts virtually all competitors' standard cylinders and interchangeable cores
Specification for this Commercial Lever:
Door Thickness: 1-3/4"to 2-1/4"standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4", please specify door thickness. Thicker door locks also available, consult factory. Backset: 2-3/4" standard. 2-3/8". Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromatic for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers available when specified, to no cost. 7 pin cylinders also available. Cylinder assemblies removable to rekey. Also vailable with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.		Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts. Latches: 1/2" bolt projection, UL listed with latch faceplates 2-1/4" x 1-1/8" with square corners standard. 3/4" projection, UL listed latch with 2-3/4" backset also vailable. Adjustable front standard. Strikes: 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 12 or 24 VAC or VDC. ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1. UL:3 hour A label.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cycles. Meets A117.1 Accessibility Code.

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome UL/cUL Listed for three-hour A label doors Meets ADA requirements		Non handed through-bolted cylindrical chassis Pressure Release lever stands up to heavy abuse and resists vandalism Double stainless steel compression springs eliminate lever sag Accepts virtually all competitors' standard cylinders and interchangeable cores
Specification for this Commerial Lever:
Door Thickness: 1-3/4"to 2-1/4"standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4", please specify door thickness. Thicker door locks also available, consult factory. Backset: 2-3/4" standard. 2-3/8" and 5" also available. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely pre-assembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers available when specified, to no cost. 7 pin cylinders also available. Cylinder assemblies removable to rekey. Also available with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.		Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts. Latches: 1/2" bolt projection, UL listed with latch faceplates 2-1/4" x 1-1/8" with square corners standard. 3/4" projection, UL listed latch with 2-3/4" backset also available. Adjustable front standard. Strikes: 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 12 or 24 VAC or VDC. ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1. UL:3 hour A label.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code.

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome UL/cUL Listed for three-hour A label doors Meets ADA requirements		Nonhanded through-bolted cylindrical chassis Pressure Release lever stands up to heavy abuse and resists vandalism Double stainless steel compression springs eliminate lever sag Accepts virtually all competitors' standard cylinders and interchangeable cores
Specification for this Commerial Lever:
Door Thickness: 1-3/4"to 2-1/4"standard. Thin door adapter kit (A30775-000-00) vailable for doors thinner than 1-3/4", please specify door thickness. Thicker door locks also vailable, consult factory. Backset: 2-3/4" standard. 2-3/8" and 5" also available. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers vailable when specified, to no cost. 7 pin cylinders also vailable. Cylinder assemblies removable to rekey. Also vailable with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.		Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts. Latches: 1/2" bolt projection, UL listed with latch faceplates 2-1/4" x 1-1/8" with square corners standard. 3/4" projection, UL listed latch with 2-3/4" backset also vailable. Adjustable front standard. Strikes: 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 12 or 24 VAC or VDC. ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1. UL:3 hour A label.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code.

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome UL/cUL Listed for three-hour A label doors Meets ADA requirements		Nonhanded through-bolted cylindrical chassis Pressure Release lever stands up to heavy abuse and resists vandalism Double stainless steel compression springs eliminate lever sag Accepts virtually all competitors' standard cylinders and interchangeable cores
Specification for this Commerial Lever:
Door Thickness: 1-3/4"to 2-1/4"standard. Thin door adapter kit (A30775-000-00) vailable for doors thinner than 1-3/4", please specify door thickness. Thicker door locks also vailable, consult factory. Backset: 2-3/4" standard. 2-3/8" and 5" also available. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers vailable when specified, to no cost. 7 pin cylinders also vailable. Cylinder assemblies removable to rekey. Also vailable with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.		Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts. Latches: 1/2" bolt projection, UL listed with latch faceplates 2-1/4" x 1-1/8" with square corners standard. 3/4" projection, UL listed latch with 2-3/4" backset also vailable. Adjustable front standard. Strikes: 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 12 or 24 VAC or VDC. ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1. UL:3 hour A label.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code.

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome UL/cUL Listed for three-hour A label doors Meets ADA requirements		Nonhanded through-bolted cylindrical chassis Pressure Release lever stands up to heavy abuse and resists vandalism Double stainless steel compression springs eliminate lever sag Accepts virtually all competitors' standard cylinders and interchangeable cores
Specification for this Commerial Lever:
Door Thickness: 1-3/4"to 2-1/4"standard. Thin door adapter kit (A30775-000-00) vailable for doors thinner than 1-3/4", please specify door thickness. Thicker door locks also vailable, consult factory. Backset: 2-3/4" standard. 2-3/8" and 5" also available. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers vailable when specified, to no cost. 7 pin cylinders also vailable. Cylinder assemblies removable to rekey. Also vailable with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.		Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts. Latches: 1/2" bolt projection, UL listed with latch faceplates 2-1/4" x 1-1/8" with square corners standard. 3/4" projection, UL listed latch with 2-3/4" backset also vailable. Adjustable front standard. Strikes: 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 12 or 24 VAC or VDC. ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1. UL:3 hour A label.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code.

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
3 Lever designs, 15 functions and 5 finishes: Bright Brass, Satin Brass, Oil Rubbed Bronze, Bright Chrome, Satin Chrome UL/cUL Listed for three-hour A label doors Meets ADA requirements		Nonhanded through-bolted cylindrical chassis Pressure Release lever stands up to heavy abuse and resists vandalism Double stainless steel compression springs eliminate lever sag Accepts virtually all competitors' standard cylinders and interchangeable cores
Specification for this Commerial Lever:
Door Thickness: 1-3/4"to 2-1/4"standard. Thin door adapter kit (A30775-000-00) vailable for doors thinner than 1-3/4", please specify door thickness. Thicker door locks also vailable, consult factory. Backset: 2-3/4" standard. 2-3/8" and 5" also available. Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation. Handing: Locks are non-handed. Cylinders: Drilled with 6 pin chambers, pinned in 5. Pinning in 6 chambers vailable when specified, to no cost. 7 pin cylinders also vailable. Cylinder assemblies removable to rekey. Also vailable with 6 or 7 pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard.		Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers –no inserts) material finished to match mating parts. Latches: 1/2" bolt projection, UL listed with latch faceplates 2-1/4" x 1-1/8" with square corners standard. 3/4" projection, UL listed latch with 2-3/4" backset also vailable. Adjustable front standard. Strikes: 4-7/8" x 1-1/4" ANSI strike with curved lip to meet ANSI A115. 2 door frame preparation standard. Screws: Furnished with combination screws for use in wood or metal doors and frames. Electrified Functions: Available in 12 or 24 VAC or VDC. ANSI/BHMA: Meets ANSI/BHMA A156.2,Series 4000,Grade 1. UL:3 hour A label.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code.

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
Schlage C Keyway Finishes: US10B (Oil Rubbed bronze) US26D (Satin Chrome) US19 (Flat Black) Functions: Keyed, Storeroom, Classroom, Privacy, Passage and Dummy Fast and Easy Installation		Clutch Function Independent return springs Removable through bolt.
Specification for this Commercial Lever:
Door ranges: 1 3/4" - 2" Door thickness (44-51MM) 1 3/8" Possible with shims / call first Front: 2 1/4" x 1 1/8", adjustable for beveled doors 1/8" in 2". Latchbolt: 1/2" throw stainless steel latch bolt (12.7 MM) RH or LH applications. Meet UL 3 Hours fire rating, UL file No. R13776 ANSI Standards - Meets or exceeds requirement of BHMA/ANSI A156.2, Series 4000 Grade 1, 400,000 Cycles. Exposed trim: Wrought Brass, bronze or stainless steel, levers are zinc casting, plated to match trim finish.		Backset: 2 3/4" (70mm) Standard, or 2 3/8" (60mm) Strike: ASA strike standard. Strike box available upon request. Latch and strike Screws: 8-32 x 1" FPH Dual Purpose Federal Standard: Meets FF-H-106C Keying 6 Pin Tumbler Cylinder, 2 keys per lock. Keying available upon request. keying charge may apply depending on quantity and complexity of keying.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade I Exceeds 800,000 Cycles. Meets A117.1 Accessibility Code.

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
Schlage C Keyway Finishes: US10B (Oil Rubbed bronze) US26D (Satin Chrome) US19 (Flat Black) Functions: Keyed, Storeroom, Classroom, Privacy, Passage and Dummy Fast and Easy Installation		Clutch Function Independent return springs Removable through bolt.
Specification for this Commercial Lever:
Door ranges: 1 3/4" - 2" Door thickness (44-51MM) 1 3/8" Possible with shims / call first Front: 2 1/4" x 1 1/8", adjustable for beveled doors 1/8" in 2". Latchbolt: 1/2" throw stainless steel latch bolt (12.7 MM) RH or LH applications. Meet UL 3 Hours fire rating, UL file No. R13776 ANSI Standards - Meets or exceeds requirement of BHMA/ANSI A156.2, Series 4000 Grade 1, 400,000 Cycles. Exposed trim: Wrought Brass, bronze or stainless steel, levers are zinc casting, plated to match trim finish.		Backset: 2 3/4" (70mm) Standard, or 2 3/8" (60mm) Strike: ASA strike standard. Strike box available upon request. Latch and strike Screws: 8-32 x 1" FPH Dual Purpose Federal Standard: Meets FF-H-106C Keying 6 Pin Tumbler Cylinder, 2 keys per lock. Keying available upon request. keying charge may apply depending on quantity and complexity of keying.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade I Exceeds 800,000 Cycles. Meets A117.1 Accessibility Code.

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacers (XN12012) can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door