1. Home
  2. Brands
  3. Weslock
  4. Weslock Stanford Handleset
SKU :W6661

Weslock Stanford Handleset

Typically Ships in 1-2 Days

Weslock Stanford Handleset

0 Review(s) Write a Review Write a Review
Weslock  Stanford  Handleset
Weslock Stanford Handleset- Shown in Satin Nickel

Helpful Information

Fits Standard Door Prep Most common standard preparation for entry door handlesets.
- Ships with 2 1/4" tall standard strike.
- Adjustable 2 3/8" - 2 3/4" Backset latch with rounded corner removable faceplate.

Description

Entry Handleset Specifications 

- Limited Lifetime Manufacturer's Mechanical Warranty
- Limited Lifetime Finish Warranty
- Lifetime PVD Exterior (Polished Brass only)

- Removable knobs/levers prevents scratching during installation
- Solid Brass
- 1" throw deadbolt with two hardened steel rollers - prevents sawing
- Meets ANSI A 156.2 Grade II cylindrical lock standards
- 5-Pin Cylinder
- Weslock standard keyway (optional Schlage keyway)
- 5-1/2" Center to Center
Click here to learn how to determine the door handing.
Not sure which handle set below you need?

**Due to high demand this item may not ship immediately.
Please allow 1-2 weeks before shipment for Polished Brass finish or call for availability

In the Box

The Weslock Stanford Handleset Includes

- Both the inside lever or knob trim and the outside handleset in the finish of your choosing.
- Latches for the upper deadbolt portion as well as the handle.
- Rounded and square corner faceplates and strike plates.
- Mounting screws and other hardware.
- Keys (For Single and Double Cylinder handlesets.

Choose Options:

SKU :W6661
Door Handing help
Handleset Function help
Interior Trim
Finishes
Select Backset help
Retail Price: $249.00
Price$174.30

Typically Ships in 1-2 Days
showHelp

Order Help


The Weslock Stanford Handleset is Available in 2 Functions:

Single Cylinder Handleset
Single Cylinder handlesets are locked/unlocked with a key from the exterior and locked/unlocked from the inside of the home with a thumbturn. (most often used)

Dummy Handleset
If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handle sets. For the active side, you'll need a single or double cylinder handleset. For the inactive door, you'll want to order a dummy handleset. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.

Double Cylinder Handleset
A double cylinder handleset has a keyed cylinder on the inside as well as the outside. This requires a key to lock or unlock the door from both sides. We don't recommend using double cylinder handlesets on main exterior doors because if there is any emergency, a key would be required to exit the home.

How to Determine Door Handingfor a Weslock Castletown Handleset

When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly.

how to determine your door handing
Follow These Steps:

step 1 Stand facing the door on the outside - If it's a locking door, stand on the side of the door where you would insert a key (or unlocking tool if it would be a privacy lock).
step 2 If the hinges are on the left, it's a left hand door. If the hinges are on the right, it's a right hand door.

 

Other

Weslock 300 Series Double Cylinder Deadbolt Measurements

Weslock 300 Series Double Cylinder Deadbolt Measurements

Weslock door hardware products are covered as long as the original purchaser owns or occupies the premises on which the product was installed. For complete warranty information see Weslock Warranty.

Measurements

Measurements for Weslock Stanford Handleset

Weslock Stanford Handleset Measurements

Others Also Bought:

Recently Viewed Hardware

Questions and Answers

Question I have a pella door and currently have a millbrook satin nickel handle set that needs to be replaced, this looks very similar to what i currently have. I believe from the middle of deadbolt to the bottom pin is 13" will your product fit?
Asked by:  - 12/14/2015
Question Unfortunately, this will be longer than that. It is around 14-1/2" on that measurement. The closest match we have to your dimensions would be the Weslock Oval handleset.

directdoorhardware.com/Weslock_Oval_handleset.htm Answer provided by:  Jake L (12/14/2015)
Hello Guest, Login Hello Guest! Logout
Information
Categories