Need help finding the right Door Hardware for your application? We'd love to help. Our showroom hours are Monday - Friday 9-5 Mountain time. Give us a call or send us an email by clicking on the contact us link below.
Door Hardware Basics
Most door hardware will fit the following door preparation. If you have something different, please contact us so we can help you find exactly what you need.
The Weslock Rockford Entrance Handleset is made from a pitted, worn and rustic molten bronze material and is available in three finishes. Choose from several knob and lever styles for the interior.
- Limited Lifetime Manufacturer's Mechanical Warranty - Removable knobs/levers prevents scratching during installation - Solid molten bronze - 1" throw deadbolt with two hardened steel rollers - prevents sawing - Meets ANSI A 156.2 Grade II lock standards - 5-Pin Cylinder - Weslock keyway standard (optional Schlage keyway) - 2 piece interior escutcheon - 5-1/4" Minimum Center to Center
Determine the handing of your door. Please allow 3-5 days before shipment.
The Weslock Rockford Handleset Includes
- Both the inside lever or knob trim and the outside handleset in the finish of your choosing. - Latches for the upper deadbolt portion as well as the handle. - Rounded and square corner faceplates and strike plates.- Mounting screws and other hardware.- Keys (For Single and Double Cylinder handlesets.
Dummy Handleset If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handle sets. For the active side, you'll need a single or double cylinder handleset. For the inactive door, you'll want to order a dummy handleset. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.
How to Determine Door Handingfor a Weslock Castletown Handleset
When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly.
Weslock Rockford Handleset Measurements
You could replace it with this handleset if you current door is prepped with two bore holes that are spaced 5 1/2" CC. Please refer to our standard door prep page for more information. One issue you will run into is the bottom mounting hole on the handleset may not match up perfectly for you. But that can be patched and painted.