Need Help? Call Us Mon-Fri 9-5 Mtn Time: Call 307-886-9449
Or Text 307-275-9700

Weslock Wiltshire Handleset

7 Review(s) Write a Review Write a Review
Weslock Wiltshire Handleset
Wiltshire Handleset - Shown in an Oil Rubbed Bronze

Helpful Information

LIMITED AVAILABILITY ON WESLOCK PRODUCTS. PLEASE CONTACT US BEFORE ORDERING

Fits Standard Door Prep Most common standard preparation for entry door handlesets.
- Ships with 2 1/4" tall standard strike.
- Adjustable 2 3/8" - 2 3/4" Backset latch with rounded corner removable faceplate.

Description

The Weslock Wiltshire Entrance Handleset is made from a pitted, worn and rustic molten bronze material and is available in three finishes. Choose from several knob and lever styles for the interior.

Entry Handleset Specifications

- Limited Lifetime Manufacturer's Mechanical Warranty
- Removable knobs/levers prevents scratching during installation
- Solid molten bronze
- 1" throw deadbolt with two hardened steel rollers - prevents sawing
- Meets ANSI A 156.2 Grade II lock standards
- 5-Pin Cylinder
- Weslock keyway standard (optional Schlage keyway)
- 2 piece interior escutcheon
- 5-1/4" Minimum Center to Center
- Fits Doors 1 3/4" - 2" Thick.

Determine the handing of your door.



In the Box

The Weslock Wiltshire Handleset Includes

- Both the inside lever or knob trim and the outside handleset in the finish of your choosing.
- Latches for the upper deadbolt portion as well as the handle.
- Rounded and square corner faceplates and strike plates.
- Mounting screws and other hardware.
- Keys (For Single and Double Cylinder handlesets.

Choose Options:

SKU :W7680
Function help
Exterior Trim Finish
Door Handing help
Interior Knob / Lever Trim
Interior Trim Finsh
Retail Price: $476.00
Price (USD)$333.20

Call for Availability
showHelp

Order Help


The Weslock Wiltshire Handleset is Available in 2 Functions:

Single Cylinder Handleset
Single Cylinder handlesets are locked/unlocked with a key from the exterior and locked/unlocked from the inside of the home with a thumbturn. (most often used)

Dummy Handleset
If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handle sets. For the active side, you'll need a single or double cylinder handleset. For the inactive door, you'll want to order a dummy handleset. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.

Double Cylinder Handleset
A double cylinder handleset has a keyed cylinder on the inside as well as the outside. This requires a key to lock or unlock the door from both sides. We don't recommend using double cylinder handlesets on main exterior doors because if there is any emergency, a key would be required to exit the home.

How to Determine Door Handingfor a Weslock Castletown Handleset

When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly.

how to determine your door handing
Follow These Steps:

step 1 Stand facing the door on the outside - If it's a locking door, stand on the side of the door where you would insert a key (or unlocking tool if it would be a privacy lock).
step 2 If the hinges are on the left, it's a left hand door. If the hinges are on the right, it's a right hand door.

Other

Weslock 300 Series Double Cylinder Deadbolt Measurements

Weslock 300 Series Double Cylinder Deadbolt Measurements

Weslock door hardware products are covered as long as the original purchaser owns or occupies the premises on which the product was installed. For complete warranty information see Weslock Warranty.

Measurements

Weslock Wiltshire Handleset Measurements

Weslock Wiltshire Handleset Measurements

Others Also Bought:

Recently Viewed Hardware

Customer Reviews

2 Stars
It looks nice but low quality
I needed an extra tall backplate to cover up some markings of old hardware on my front door, and this seemed like the perfect fit. In fact, the size, color, and style went well with my old hardwood door. However, the piece itself was a big pain. The inner and outer hardware wouldn't line up just right, causing the latch to not function correctly. I played around with it for a few hours but it still wouldn't fit right. Maybe I received a dud. Also, The deadbolt mechanism seemed strong, but the latch to turn it was light and felt cheap. I decided to look for something else....
Did you find this helpful?  4 of 4 Found Helpful
Reviewed by:  from Atlanta, GA. on 11/22/2012
2/5
5 Stars
The most beautiful door hardware
Ordering from DirectDoorHardware.com was the easiest, most pleasant experience. From the time I placed the order to the time I received the entire order was a matter of 18 days (that was all the door hardware for my new home. I couldn't get want I wanted in New Zealand, but Direct Door Hardware came thru, will be recommending you to all my friends.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from New Zealand. on 12/18/2013
5/5
5 Stars
home owner
Absolutely gorgeous...easy to install...very satisfied with fast service...would order from again...
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from va.. on 12/16/2018
5/5
5 Stars
Owner of house
Have had it installed for a week and it looks very nice and appears to be very sturdy and heavy duty.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Ohio. on 6/27/2014
5/5
5 Stars
Love it!
This a beautiful handle set! This matched perfectly for our Spanish home. It is sturdy and aesthetically beautiful! The only gripe I have is that it gets "hot" to touch on warm summer days! Other than that, we love it!
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from El Cajon, Ca. on 10/24/2014
5/5
3 Stars
owner
Lockset looked great, but latch did not work correctly. I spent a few hours adding some shims under the inside mechanism so latch would not stick. Also one of the screws that holds the lower mechanism in place seemed to be cross threaded because I couldn't get the screw to seat properly and thus only have one screw holding mechanism in place. I was told this was an inferior model but b
Did you find this helpful? 
Reviewed by:  from Mancos. on 8/27/2022
3/5
3 Stars
owner
The handle set you sent me had a key lock instead of a thumb turn on the inside set. My husband installed it before I saw it was incorrect. I meant to let you know sooner.
Did you find this helpful? 
Reviewed by:  from CA. on 9/25/2017
3/5

[productqa_] Questions and Answers

Question how soon can we get product delivered?
Asked by: diane - 6/24/2015
Question This product is normally shipped within 1-2 days and we can ship however you like. If you choose the standard ground shipping option the actual ship time will depend on your location. For expedited shipment please call us. Answer provided by:  Josh (6/24/2015)
Question Can this handle set be ordered with a different finish on the inside versus the outside? If not, can any of the handle sets you sell be ordered this way?
Asked by: Bruce Wallingford - 8/25/2015
Question The Wiltshire handleset, and most others we sell, can be ordered with a split finish. Please call us to place your order. Answer provided by:  Josh (8/26/2015)
Question What is the benefit of chosing the Weslock keyway vs the schlage keyway when purchasing the wiltshire handleset?
Asked by: Sarah Patte - 10/25/2018
Question This lock comes with the Weslock keyway. You would have it changed to the Schlage keyway if you already have Schlage locks and want to match the keys for the new lock with your existing locks. Answer provided by:  Josh (10/25/2018)
Question It says an optional Schlage keyway, so does that mean we can buy it with that keyway? OR do we have to purchase it separately? We are needing these for 5 different doors plus a dumby door. Please advise
Asked by: Sarah Patte - 10/25/2018
Question Yes, you can buy it with a Schlage keyway, you just have to request it at the time of purchase. We cam have everything keyed alike for you as well if you would like. There is a way to do it online with the comment/keying box to the right of entering your credit card payment information (just say, "Schlage Keyways Please") or you can give us a call at 307-886-9449

Thanks, Answer provided by:  Zach (10/26/2018)
Question Does the L7600F-1 fit on 2” thick doors?
Asked by: Lucio - 2/13/2020
Question This handleset will fit up to 2" door thickness Answer provided by:  Josh (2/13/2020)
Question will this entry door handle set fit a 2.25" thick door?
Asked by: Mike Gentry Sr - 6/9/2021
Question This will not fit 2 1/4" thick door. This handleset is designed for standard exterior door, 1 3/4" thick. The Emtek Wilmington (brass) or Greely (sandcast bronze) are both similar and can be ordered for thicker doors like yours. Answer provided by:  Zach (6/9/2021)
Question hi i have a Weslock Wiltshire Molten Bronze SKU :W7680, with a single cylinder, i need a replacement cylinder for it, what is the item number and how much does it cost? i also saw an option that says "single cylinder with interconnect" what is it, what does it do, and if it is what it think it is, can i adapt it to my old door lock?
Asked by: Ruben I Esquer - 7/5/2021
Question Hello, The with the interconnected lock option the deadbolt is automatically unlocked when the interior knob or lever is turned. This is normally used in nursing home or daycare applications where a single action lock is required by code. Your lock can only be converted to an interconnected lock by purchasing a replacement interior half. The cost for the interconnected interior is $127.94. You can order a replacement cylinder for the lock. This part is not on our website, but we can order from Weslock for you. The cost is $24.99. You can order this part by phone. Answer provided by:  Josh (7/6/2021)
Question Does this lock set work with a door that is 2 1/4 inches thick
Asked by: Amy - 7/31/2022
Question No, this is designed for standard 1 3/4" thick doors. If you want that look, consider the Emtek Greely which can be ordered for thicker doors. See: https://www.directdoorhardware.com/emtek_greeley_handleset.htm Answer provided by:  Zach (8/1/2022)
Question Does this lock set work with a door that is 2 1/4” thick
Asked by: Amy - 7/31/2022
Question No, this is designed for standard 1 3/4" thick doors. If you want that look, consider the Emtek Greely which can be ordered for thicker doors. See: https://www.directdoorhardware.com/emtek_greeley_handleset.htm Answer provided by:  Zach (8/1/2022)
Question Is the Wiltshire handleset in oil rubbed bronze, right handed, with Carlow lever in stoc
Asked by: Electra - 9/2/2023
Question We currently have them available with the durham or wexford knob. It would ship same or next day depending on the time of order. Answer provided by:  Jake (9/5/2023)
Hello Guest, Login Hello Guest! Logout
Information