Need Help? Call Us Mon-Fri 9-5 Mtn Time: Call 307-886-9449
Or Text 307-275-9700

Weslock New Haven Lever

7 Review(s) Write a Review Write a Review
Weslock New Haven Lever
Weslock New Haven Lever Handle

Helpful Information



Get Matching DEADBOL


In the Box

Whats Included in Your Weslock New Haven Door Lever

Passage Door Lever Contents
A Lever for both sides of the door, latch mechanism, strike plates and mounting screws.

Privacy Door Lever Contents
A Lever for both sides of the door, latch mechanism, generic unlocking tool, strike plates and mounting screws.

Keyed Entrance Lever Handle Contents
A Lever for both sides of the door, latch mechanism, keys, strike plates and mounting screws. If you have several keyed locks keyed alike, there may not be a key for every lock shipped.

Single Dummy Lever Handles
A single non functioning lever and mounting screws


Choose Options:

SKU :W200X
Function help
Retail Price: $40.70
Price (USD)$28.49

Call for Availability

Order Help

Weslock New Haven Lever Handle Functions

Weslock Lever Handles are available in several functions. Please review the descriptions below so you can order the correct door lever for your application.

Passage Door Knob Function Weslock Passage or Hall and Closet Lever Handles are used on doors that do not require a locking mechanism. Halls, closets, pantry or laundry doors will generally use a passage leverset. Passage levers do not have a locking mechanism.

Privacy Door Knob Function Weslock Privacy or Bed and Bath Door Levers are most often used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Weslock privacy levers have a Push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some levers will have a pin hole inside a circular piece, some just have a small pinhole.

Keyed Entrance Door Knob Function Weslock Keyed Entrance Door levers are generally used on exterior doors, but sometimes used on interior doors where security is a concern. Weslock keyed entrance leverss have a push button lock on the inside backplate, similar to a privacy lock. On the outside there is a keyed cylinder. If the Lever is locked from the inside a key is required for entrance. If you are ordering several keyed locks of the same brand we can key them alike for you.

Single Dummy Door Knob Function Weslock Single Dummy Door Levers are sold individually. Dummy levers do not have a latch or mechanism of any kind. These levers are surface mounted to a door that has not been bored (large hole cut out) for a lever. Dummy leverss are generally used on double doors that us a ball catch at the top to keep them closed so a latch is not required. They are also commonly found on the inactive side of a french door - a single dummy mounted on either side of the inactive door.


Weslock door hardware products are covered as long as the original purchaser owns or occupies the premises on which the product was installed. For complete warranty information see Weslock Warranty.

Others Also Bought:

Recently Viewed Hardware

Customer Reviews

5 Stars
Good quality easy to install the handle was easily revered. Really updated our home.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by: (Verified Buyer)  from Pa. on 8/2/2015
5 Stars
Great looking and functioning product. Also easy to install. Highly recommend
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Northern VA. on 8/8/2017
5 Stars
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from VIRGINIA. on 4/8/2013
5 Stars
door hardware
Nice door handles, very solid and the oil bronzed finish is very rich looking! They are a perfect match for our new white doors! Thank you for your friendly customer service.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from PA. on 3/8/2012
5 Stars
Quality product, easy to install
We converted our entire house over to this line of handles and knobs. The product is substantial and the finishes are consistent. I was able to install over 40 units in less than a day.
Did you find this helpful? 
Reviewed by:  from DFW. on 4/18/2021
5 Stars
I bought several of these handles. They are decorative, the finish is great and they are heavy duty, easy to install. The price can't be beat.
Did you find this helpful? 
Reviewed by:  from Temperance. on 6/3/2018
1 Stars
I will never buy these locks again. They are not well maid and come apart.
Did you find this helpful? 
Reviewed by:  from 8904 Jason Ct North Richland Hills, Tx 76182. on 1/18/2015

[productqa_] Questions and Answers

Question how do you reverse the handle swing?
Asked by:  - 11/7/2015
Question To reverse the handing the lever handles are removed from the chassis and you switch the outside handle with the inside handle. This is explained in the installation instructions Answer provided by:  Josh (11/9/2015)
Question do these come with drive in latches?
Asked by: Robert - 2/27/2016
Question These do not come standard with drive-in latches but if you specify when ordering that you will need a drive-in latch then we can send the lever out with that. Answer provided by:  Jake L (2/29/2016)
Question It the corner latch square or rounded?
Asked by: AL - 7/18/2018
Question The latch faceplate has rounded corners Answer provided by:  Josh (7/19/2018)
Question Does the door set come with a latch mechanism without the mortise plate? All of my interior door are not mortised on the edge. They simply have a 1” hole.
Asked by: Dan - 7/25/2019
Question This one comes with the rectangular faceplate. The Schlage accent is a similar lever style and it comes with the drive-inn style latch Answer provided by:  Josh (7/25/2019)
Question Will this fit in a 2" bore hole? I also need matching deadbolts
Asked by: Deb - 8/14/2019
Question Deb, standard bore prep for doors is 2 1/8" so you either measured a little shy of that, or if you do have a 2" bore hole, it is probably close enough for it to work. Most hardware measures slightly smaller for some wiggle room. You can expand your bore hole with a file if necessary. Just about all hardware is manufactured to fit the 2 1/8" bore hole. As far as a matching deadbolt, I find it useful to shop by brand and I'd just stick with weslock, so the finishes match but you could really choose any deadbolt you want to go with this lever. Since the new haven lever has a round rosette (decorative plate) you could just go with this one for a good match.

For all of weslocks deadbolt offerings see this link:

thanks! Answer provided by:  Zach (8/14/2019)
Question Will weslock work on a door 2 1/4" thick
Asked by: Noel - 9/10/2023
Question No, I'm sorry. Checkout some Kwikset or Emtek Levers. Answer provided by:  Zach (9/11/2023)
Question If I order locks and deadbolts, are they all keyed alike? If I order say, 5 locks and 4 deadbolts, how many keys do I receive? Is tax involved, and if so, how much.
Asked by: Carmen Cerra - 1/25/2015
No Answers have been submitted yet.
Hello Guest, Login Hello Guest! Logout