Need Help? Call Us Mon-Fri 9-5 Mtn Time: Call 307-886-9449
Or Text 307-275-9700

Weslock Colonial 1300 Entrance Handleset

1 Review(s) Write a Review Write a Review
Weslock Colonial 1300 Entrance Handleset
Colonial 1300 Handleset

Helpful Information


*Requires Non-Standard Door PrepMost common standard preparation for entry door handlesets.
- Ships with 2 1/4" tall standard strike.


- Will not fit standard bore 5 1/2" CC doors.
- Requires 8" CC Bore Hole Door Prep.


Entry Handleset Specifications 

- Limited Lifetime Manufacturer's Mechanical Warranty
- Limited Lifetime Finish Warranty
- Removable knobs/levers prevent scratching during installation
- Solid Brass
- Fits doors prepared with 2 1/8" top (1 5/8" optional) and 2 1/8" bottom cross hole and 1" edge hole;
- 8" Minimum center to center from bore to bore. - Non-adjustable latches 2 3/8" or 2 3/4" with removable faceplates
- Adjusts to door thickness from 1 3/4" to 2"
- C Measurement 8 3/16 inches
- 1" throw deadbolt with two hardened steel rollers prevents sawing - Heavy duty security strikes with 3" screws

Click here to learn how to determine the handing of your door.
Not sure which handle set you need?
**Due to high demand this item may not ship immediately. Please call for availability.

In the Box

The Weslock Colonial 1300 Handleset Includes

- Both the inside lever or knob trim and the outside handleset in the finish of your choosing.
- Latches for the upper deadbolt portion as well as the handle.
- Rounded and square corner faceplates and strike plates.
- Mounting screws and other hardware.
- Keys (For Single and Double Cylinder handlesets.

Choose Options:

SKU :W1313
Handleset Function help
Door Handing help
Interior Trim
Interior Finish help
Retail Price: $415.00
Price (USD)$290.50

Currently backordered until mid-2024

Order Help

The Weslock Colonial 1300 Handleset is Available in 2 Functions:

Single Cylinder Handleset
Single Cylinder handlesets are locked/unlocked with a key from the exterior and locked/unlocked from the inside of the home with a thumbturn. (most often used)

Dummy Handleset
If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handle sets. For the active side, you'll need a single or double cylinder handleset. For the inactive door, you'll want to order a dummy handleset. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.

Double Cylinder Handleset
A double cylinder handleset has a keyed cylinder on the inside as well as the outside. This requires a key to lock or unlock the door from both sides. We don't recommend using double cylinder handlesets on main exterior doors because if there is any emergency, a key would be required to exit the home.

How to Determine Door Handingfor a Weslock Castletown Handleset

When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly.

how to determine your door handing
Follow These Steps:

step 1 Stand facing the door on the outside - If it's a locking door, stand on the side of the door where you would insert a key (or unlocking tool if it would be a privacy lock).
step 2 If the hinges are on the left, it's a left hand door. If the hinges are on the right, it's a right hand door.



Measurements for Weslock Colonial 1300 Entrance Handleset

Weslock Colonial 1300 Entrance Handleset Measurements

Others Also Bought:

Recently Viewed Hardware

Customer Reviews

5 Stars
Very well built. Very good looking finish, the antique brass looks beautiful.
Did you find this helpful? 
Reviewed by:  from Florida. on 4/17/2016

[productqa_] Questions and Answers

Question I want what is pictured for this lockset, but what options should I select for a standard door? Also, instead of the interior knob, is the handle available?
Asked by: Helen - 11/21/2015
Question You'll need to double check how your door is prepped to verify that it is standard - not all doors are prepped with standard measurements. This set will fit doors that have two bore holes 2 1/8" diameter that are no less than 4 1/2" Center to center. There are lever options, see options menus to choose the lever style and finish you'd like. Answer provided by:  Jake (11/23/2015)
Hello Guest, Login Hello Guest! Logout