Schlage ND Series Grade 1 Sparta Entry Lock

Schlage ND Series Sparta Lever Keyed Entrance Lock

Schalge's ND Series locks have long been one of their best selling locks because they are tough, durable and Grade 1 Rated. Recently Schlage has made these dependable locks even better by simplifying the installation. With these changes Schlage's locks are easier to install correctly the first time, resulting in a longer lasting lock providing peace of mind that every door is safe and secured with a lock built to last.

Schlage's ND series locks are perfect for Schools, Hospitals, Offices, Retail Spaces, Universities, Restaurants and other high traffic applications.

Schlage ND Series Specs

Handing:
ND Series Levers are non-handed.
Door Thickness:
Fits Doors 1 5/8" to 2 1/8" Thick (41MM-54MM) standard including Vandlguard Functions. 1 3/4"-2" for Function ND85. Spacer can be purchased for 1 3/8" doors. Can be special ordered for thicker doors with a 6-8 week leadtime.
Backset:
Must specify backset when ordering. Available in 2 3/4" (70MM) 2 3/8" (60MM) 3 3/4" (95MM) and 5" (127MM)
Faceplate:
Brass Bronze or Stainless steel - 1 1/8" x 2 1/4" (29MM x 57MM) Square Corner, Beveled.
Lock Chassis:
Zinc Plated for corrosion resistance
Latch Bolt:
Steel 1/2" (12MM) Throw, deadlocking on the keyed and exterior functions.
Exposed Trim:
Pressure cast Zinc plated to match symbols on levers. Roses Brass, bonze or Zinc depending on finish.
Strike:
ANSI Curved lip strike 1 1/4" x 4 7/8" x 1 3/16" lip to center standard.
Cylinder and Keys:
6 Pin Everest 29 S123 Keyway Standard with two patented nickel silver keys per lock. Also availabe in large format IC with or without core.
Keying Options:
Key Alike, Master Keying or Construction Keying. Please give us a call for keying costs.
Warranty:
Ten Year Limited warranty for all functions.

Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 1 strength
and operational requirements. Meets A117.1 Accessibility Code
Federal:
Meets FF-H-106C Series 161.
California State Reference Code:
(Formerly Title 19, California State Fire Marshal Standard) All levers with less than 1/2” (64mm) returns comply; Schlage levers return to within 1/2” of door face.
MEA Certification:
All electrified locking (fail-safe, unlocked by switch or power failures) functions accepted for use in New York City by the City of New York, Department of Buildings (MEA 24-04-E).

All levers with less than 1/2” (64mm) returns comply with California Fire Safety Codes.
Florida Building Commission:
3/4” and 1/2” throw latch approved for Hurricane Resistance with Miami-Dade County, Florida.
UL / cUL:
All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol.
ADA Compliant:
Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act

Meets ADA requirements.

UL Listed for 3 Hour Fire Door