• 2 3/8" - 2 3/4" adjustable backset
• Full 1" throw deadbolt with hardened steel rod insert - prevents sawing
• 6-Pin Cylinder
• Fits door thickness of 1 3/4"
• 5-1/2" Center to Center
• Fits doors prepared with standard 2 1/8" bore hole with 1" cross bore.
• Polished Brass finish available with Tustin Lever or Hancock Knob interiors Only
• The following interior styles are available with Square rosettes. Call to set up as special orders at no additional cost. Halifax Lever, Lisbon Lever, Milan Lever, and Pismo Knob

• 2 3/8" - 2 3/4" adjustable backset
• Full 1" throw deadbolt with hardened steel rod insert - prevents sawing
• 6-Pin Cylinder
• Fits door thickness of 1 3/4"
• Fits doors prepared with standard 2 1/8" bore hole with 1" cross bore.
• 5-1/2" Center to Center

• 2 3/8" - 2 3/4" adjustable backset
• Full 1" throw deadbolt with hardened steel rod insert - prevents sawing
• 6-Pin Cylinder
• Fits door thickness of 1 3/4"
• Fits doors prepared with standard 2 1/8" bore hole with 1" cross bore.
• 5-1/2" Center to Center

• 2 3/8" - 2 3/4" adjustable backset
• Full 1" throw deadbolt with hardened steel rod insert - prevents sawing
• 6-Pin Cylinder
• Fits door thickness of 1 3/4"
• Fits doors prepared with standard 2 1/8" bore hole with 1" cross bore.
• 5-1/2" Center to Center

• 2 3/8" - 2 3/4" adjustable backset
• Full 1" throw deadbolt with hardened steel rod insert - prevents sawing
• 6-Pin Cylinder
• Fits door thickness of 1 3/4"
• Fits doors prepared with standard 2 1/8" bore hole with 1" cross bore.
• 5-1/2" Center to Center

Emtek Door Hardware Includes:
- Complete set. Includes knobs/levers and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Standard mortise door preparation
- ANSI A115.1
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 1/2" or 2 3/4" backsets.

What is the difference between the F20 Fuction box and the F13 function box? The F20 Mortise box has buttons on the edge of the door that allow you to set the box to lock behind you as you leave the home, or another button to keep the door unlocked. This button setting is reset each time the door is locked. The F13 Mortise does not have the buttons on the edge of the box. This set will only lock when locked with a key outside or thumbturn inside.

Available Knobs and Levers for the Emtek Arts & Crafts Handleset
**Additional Emtek brass interior trim styles may be available upon request. Please call for more details**
Arts & Crafts Lever	Hammered Lever
Bristol Knob	Diamond Crystal Knob	Ebony Knob	Georgetown Knob	Hammered Egg Knob
Hampton Knob	Ice White Knob	Old Town Knob	Lowell Crystal Knob	Windsor Crystal Knob

Emtek Door Hardware Includes:
- Complete set. Includes knobs/levers and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Standard mortise door preparation
- ANSI A115.1
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 1/2" or 2 3/4" backsets.

Knob and Lever Options for the Memphis Mortise Sideplate Lock
**Additional Emtek knobs and levers styles may be available upon request. Please call for more detail**
Cortina Lever	Elan Lever	Milano Lever	Rustic Lever	Ribbon & Reed Lever
Rope Lever	Santa Fe Lever	Turino Lever	Wembley Lever	Coventry Lever
Merrimack Lever
Belmont Knob	Bristol Crystal Knob	Diamond Crystal Knob	Ebony Knob	Egg Knob
Hampton Crystal Knob	Ice White Knob	Lancaster Knob	Melon Knob	Old Town Knob
Beaded Egg Knob	Providence Knob	Ribbon & Reed Knob	Rope Knob	Victoria Knob
Waverly Knob	Lowell Knob	Windsor Knob

Emtek Door Hardware Includes:
- Complete set. Includes knobs/levers and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Standard mortise door preparation
- ANSI A115.1
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 1/2" or 2 3/4" backsets.

Knob and Lever Options for the Manhattan Mortise Sideplate Lock
**Additional Emtek knobs and levers styles may be available upon request. Please call for more detail**
Cortina Lever	Elan Lever	Milano Lever	Rustic Lever	Ribbon & Reed Lever
Rope Lever	Santa Fe Lever	Turino Lever	Wembley Lever	Coventry Lever
Merrimack Lever
Belmont Knob	Bristol Crystal Knob	Diamond Crystal Knob	Ebony Knob	Egg Knob
Hampton Crystal Knob	Ice White Knob	Lancaster Knob	Melon Knob	Old Town Knob
Beaded Egg Knob	Providence Knob	Ribbon & Reed Knob	Rope Knob	Victoria Knob
Waverly Knob	Lowell Knob	Windsor Knob

Emtek Door Hardware Includes:
- Complete set. Includes knobs/levers and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Standard mortise door preparation
- ANSI A115.1
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 1/2" or 2 3/4" backsets.

What is the difference between the F20 Function Mortise box and the F13 Function box? The F20 Mortise box has buttons on the edge of the door that allow you to set the box to lock behind you as you leave the home, or another button to keep the door unlocked. This button setting is reset each time the door is locked. The F13 Mortise does not have the buttons on the edge of the box. This set will only lock when locked with a key outside or thumbturn inside.

Knob and Lever Options for the Da Vinci Mortise Sideplate Lock
Napoli Lever	Padua Lever	Medici Lever	Octagon Lever
Petal Knob	Parma Knob	Octagon Knob

Emtek Door Hardware Includes:
- Complete set. Includes knobs/levers and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Standard mortise door preparation
- ANSI A115.1
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 1/2" or 2 3/4" backsets.

What is the difference between the F20 Function Mortise box and the F13 Function box? The F20 Mortise box has buttons on the edge of the door that allow you to set the box to lock behind you as you leave the home, or another button to keep the door unlocked. This button setting is reset each time the door is locked. The F13 Mortise does not have the buttons on the edge of the box. This set will only lock when locked with a key outside or thumbturn inside.

Knob and Lever Options for the Octagon Mortise Sideplate Lock
Napoli Lever	Padua Lever	Medici Lever	Octagon Lever
Petal Knob	Parma Knob	Octagon Knob

Emtek Door Hardware Includes:
- Complete set. Includes knobs/levers and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Standard mortise door preparation
- ANSI A115.1
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 1/2" or 2 3/4" backsets.

What is the difference between the F20 Function Mortise box and the F13 Fuction box? The F20 Mortise box has buttons on the edge of the door that allow you to set the box to lock behind you as you leave the home, or another button to keep the door unlocked. This button setting is reset each time the door is locked. The F13 Mortise does not have the buttons on the edge of the box. This set will only lock when locked with a key outside or thumbturn inside.

Knob and Lever Options for the Rectangular Mortise Sideplate Lock
Cody Lever	Durango Lever	Teton Lever	Bronze Egg Knob	Butte Knob	Winchester Knob

Emtek Door Hardware Includes:
- Complete set. Includes knobs/levers and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Standard mortise door preparation
- ANSI A115.1
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 1/2" or 2 3/4" backsets.

What is the difference between the F20 Function Mortise box and the F13 Function box? The F20 Mortise box has buttons on the edge of the door that allow you to set the box to lock behind you as you leave the home, or another button to keep the door unlocked. This button setting is reset each time the door is locked. The F13 Mortise does not have the buttons on the edge of the box. This set will only lock when locked with a key outside or thumbturn inside.

Knob and Lever Options for the Cheyenne Mortise Sideplate Lock
Cody Lever	Durango Lever	Teton Lever	Bronze Egg Knob	Butte Knob	Winchester Knob

The Schlage Plymouth handleset is availabe with several interior knob and lever options and multiple finishes to match your other schlage locks or home decor. Choose from the pull down menus above to customize the handleset that is right your you. Schlage handlesets can be keyed alike your other Schlage products. Split finish handlesets are available upon request.

Schlage Plymouth Handle Set Specs:
- Replaces virtually any existing lock
- Easy installation: One-person project; no extra hands needed
- ANSI Grade 2 with maximum security features
- Lifetime finish and mechanical guarantee
- Designs and finishes to match any home's architectural style.
- Lifetime brass finish is on the exterior of the handleset only.
- Latch measurements - 1" x 2 1/4", 1/4" Radius corner faceplate, 7/8" housing diameter, 1/2" throw springlatch
- Deadbolt measurements - 1" x 2 1/4" radius corner faceplate, 7/8" housing diameter, 1" throw
- Strike plate measurements - 1 5/8" x 2 1/4", radius corner, full lip, no box latch strike & 1 1/8" square corner, no box deadbolt strike
- Door frame reinforcer with 3" screws
- Adjustable latch - 2 3/8" or 2 3/4" backset
- 5-pin solid brass, keyed 5-pin, C-keyway, keyed different unless specified
- Fits 1 5/8" - 1 3/4" thick doors. Packed with extra mounting screws to accomodate 2" doors.
- Handle measurement thru-bolt fits a range of 7 3/4" - 9 1/4"

Available Interior Trim (see menus for finishes)
Accent Lever	Avanti Lever
Manhattan Lever	Elan Lever
Flair Lever	Jazz Lever
Bell Knob	Georgian Knob
Orbit Knob	Plymouth Knob
Siena Knob

The Schlage Camelot handleset is available with several interior knob and lever options and multiple finishes to match your other Schlage locks or home decor. Choose from the pull-down menus above to customize the handleset that is right for you. Schlage handlesets can be keyed alike your other Schlage products. Split finish handlesets are available upon request.

***Oil Rubbed Bronze and Aged Bronze are quite similar. We are noticing more people prefer the Aged Bronze because it has more of a glossy finish with a rubbed look. The Oil Rubbed Bronze is more of a solid matte brown color.

Schlage Camelot Handle Set Specs:
- Replaces virtually any existing lock
- Easy installation: One-person project; no extra hands needed
- ANSI Grade 2 with maximum security features
- Lifetime finish and mechanical guarantee
- Designs and finishes to match any home's architectural style.
- Lifetime brass finish is on the exterior of the handleset only.
- Latch measurements - 1" x 2 1/4", 1/4" Radius corner faceplate, 7/8" housing diameter, 1/2" throw springlatch
- Deadbolt measurements - 1" x 2 1/4" radius corner faceplate, 7/8" housing diameter, 1" throw
- Strike plate measurements - 1 5/8" x 2 1/4", radius corner, full lip, no box latch strike & 1 1/8" square corner, no box deadbolt strike
- Door frame reinforcer with 3" screws
- Adjustable latch - 2 3/8" or 2 3/4" backset
- 5-pin solid brass, keyed 5-pin, C-keyway, keyed differently unless specified
- Fits 1 5/8" - 1 7/8" thick doors.

The Schlage Century handleset is available with several interior knob and lever options and multiple finishes to match your other Schlage locks or home decor. Choose from the pull-down menus above to customize the handleset that is right for you. Schlage handlesets can be keyed alike to your other Schlage products. Split finish handlesets are available upon request.

***Oil Rubbed Bronze and Aged Bronze are quite similar. We are noticing more people prefer the Aged Bronze because it has more of a glossy finish with a rubbed look. The Oil Rubbed Bronze is more of a solid matte brown color.

Schlage Century Handle Set Specs:
- Replaces virtually any existing lock
- Easy installation: One-person project; no extra hands needed
- ANSI Grade 2 with maximum security features
- Lifetime finish and mechanical guarantee
- Designs and finishes to match any home's architectural style.
- Lifetime brass finish is on the exterior of the handleset only.
- Latch measurements - 1" x 2 1/4", 1/4" Radius corner faceplate, 7/8" housing diameter, 1/2" throw springlatch
- Deadbolt measurements - 1" x 2 1/4" radius corner faceplate, 7/8" housing diameter, 1" throw
- Strike plate measurements - 1 5/8" x 2 1/4", radius corner, full lip, no box latch strike & 1 1/8" square corner, no box deadbolt strike
- Door frame reinforcer with 3" screws
- Adjustable latch - 2 3/8" or 2 3/4" backset
- 5-pin solid brass, keyed 5-pin, C-keyway, keyed differently unless specified
- Fits 1 5/8" - 1 3/4" thick doors.

The Georgian knob by Schlage is a popular choice because of its simple, yet refined styling. This knob is available in several finishes to match your unique style. Schlage knobs are easy to install and include lifetime mechanical and finish warranty. The Schlage F-Series locks are rated a grade 2 lock, intended for residential single and multi-family door applications.

Product Features:

• Keyed models resistant to pick and bump security attacks
• ANSI Grade 2 standards
• Quality materials and construction
• Lifetime mechanical and finish guarantee
• Recommended applications: residential single and multi-family
• Keying: 5-pin tumbler C keyway with two keys
• Door thickness 1-3/8" to 1-3/4" standard
• Universal backset latch for 2-3/8" or 2-3/4" door preparation. 5" backset latch also available
• Easy installation

Kwikset single cylinder deadbolts are an excellent value. Quality built deadbolts to increase your home security include all necessary mounting hardware (strike plates, screws, bolts, etc. Installation may require some drilling or chiseling. Professional installation is recommended for best results). Compare at over $25!

Kwikset Single Cylinder Deadbolt Specs - Adjustable Backset to fit 2 3/8" or 2 3/4" door prep. - Fits standard 2 1/8" bore hole - 1" cross bore - Standard Installation Fitting - Replaces most existing locks.

Available Finishes Polished Brass Antique Brass Venetian Bronze Satin Nickel Satin Chrome Polished Chrome Antique Nickel

Kwikset Single Cylinder deadbolts are an excellent value. Quality built deadbolts to increase your home security include all necessary mounting hardware (strike plates, screws, bolts, etc. Installation may require some drilling or chiseling. Professional installation is recommended for best results). Compare at over $25!

Kwikset Single Cylinder Deadbolt Specs - Adjustable Backset to fit 2 3/8" or 2 3/4" door prep. - Fits standard 2 1/8" bore hole - 1" cross bore - Standard Installation Fitting - Replaces most existing locks.

Available Finishes Polished Brass Antique Brass Venetian Bronze Satin Nickel Satin Chrome Rustic Pewter Rustic Bronze Iron Black Polished Chrome Antique Nickel

Single Cylinder Deadbolts are unlocked with a key on one side and unlocked from the inside of the home with a thumbturn. Most exterior doors use a combination of one deadbolt, and a keyed lever handle or door knob.

To have keyed alike to other knobs or levers you are ordering, you must order the same brand.

Technical Information:
Installation Instructions

Emtek Tuscany Handleset Includes:

- Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner strike & faceplate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- 5 1/2" center to center (minimum 4 1/2" CC)

To have keyed alike to other knobs or levers you are ordering, you must order the same brand.

Emtek Tuscany Handleset Includes:

- Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner strike & faceplate. Round corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- 5 1/2" center to center
- Interconnect device available.

To have keyed alike to other knobs or levers you are ordering, you must order the same brand.

Technical Information:
Installation Instructions

Emtek Denver Handleset Includes:
- Complete set. Includes large entry handle and deadbolt for exterior, knob or lever and backplate for interior, latchbolt, face plate, strike plate and mounting hardware.
- Standard 2 1/8" door preparation
- Schlage C Keyway
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- 5 1/2" center to center (minimum 4 1/2" CC)

To have keyed alike to other knobs or levers you are ordering, you must order the same brand.

Technical Information:
Installation Instructions

Emtek Remington Handleset Includes:
- Complete set. Includes large entry handle and deadbolt for exterior, knob or lever and backplate for interior, latchbolt, face plate, strike plate and mounting hardware.
- Standard 2 1/8" door preparation
- Schlage C Keyway
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
-5 1/2" center to center
-Interconnect device available

• Solid Forged Brass
• Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
• Shipped with Mortised tubular latch (drive-in latches are available upon request)
• Schlage C Keyway
• Standard 2 1/8" Bore, 1" Crossbore and 5 1/2" CC door prep.
• Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
• Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.

To have keyed alike to other knobs or levers you are ordering, you must order the same brand.

Installation Instructions

Emtek Rectangular Sectional Handleset Includes:
- Complete set. Includes large entry handle and deadbolt for exterior, knob or lever and backplate for interior, latchbolt, face plate, strike plate and mounting hardware.
- Standard 2 1/8" door preparation
- Schlage C Keyway
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.

Technical Information:
Emtek Sandcast Rectangular Sectional Installation Instructions

Emtek Rectangular Monolithic Handleset Includes:
- Complete set. Includes large entry handle and deadbolt for exterior, knob or lever and backplate for interior, latchbolt, face plate, strike plate and mounting hardware.
- Standard 2 1/8" door preparation
- Schlage C Keyway
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.

Technical Information:
Emtek Sandcast Rectangular Monolithic Installation Instructions

Emtek Rectangular Full Length Handleset Includes:
- Complete set. Includes large entry handle and deadbolt for exterior, knob or lever and backplate for interior, latchbolt, face plate, strike plate and mounting hardware.
- Standard 2 1/8" door preparation
- Schlage C Keyway
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.

Technical Information:
Emtek Sandcast Rectangular Full Length Monolithic Handleset installation instructions

Emtek Marietta Handleset Includes:

- Solid Forged Brass
- Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Schlage C Keyway
- Standard 2 1/8" Bore, 1" Crossbore and 5 1/2" CC door prep.
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.

To have keyed alike to other knobs or levers you are ordering, you must order the same brand.

Technical Information:
Installation Instructions

Emtek Knoxville Handleset Includes:

- Solid Forged Brass
- Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Schlage C Keyway
- Standard 2 1/8" Bore, 1" Crossbore and 5 1/2" CC door prep.
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.

Technical Information:
Installation Instructions

Emtek Orleans Handleset Includes:

- Solid Forged Brass
- Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Schlage C Keyway
- Standard 2 1/8" Bore, 1" Crossbore and 5 1/2" CC door prep.
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset measurement must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backset latch.

Technical Information:
Installation Instructions

Emtek Arts & Crafts Handleset Includes:

- Solid Forged Brass
- Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Schlage C Keyway
- Standard 2 1/8" Bore, 1" Crossbore and 5 1/2" CC door prep.
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.

Technical Information:
Installation Instructions