Kwikset single cylinder deadbolts are an excellent value. Quality built deadbolts to increase your home security include all necessary mounting hardware (strike plates, screws, bolts, etc. Installation may require some drilling or chiseling. Professional installation is recommended for best results). Compare at over $25!

Kwikset Single Cylinder Deadbolt Specs - Adjustable Backset to fit 2 3/8" or 2 3/4" door prep. - Fits standard 2 1/8" bore hole - 1" cross bore - Standard Installation Fitting - Replaces most existing locks.

Available Finishes Polished Brass Antique Brass Venetian Bronze Satin Nickel Satin Chrome Polished Chrome Antique Nickel

Kwikset Single Cylinder deadbolts are an excellent value. Quality built deadbolts to increase your home security include all necessary mounting hardware (strike plates, screws, bolts, etc. Installation may require some drilling or chiseling. Professional installation is recommended for best results). Compare at over $25!

Kwikset Single Cylinder Deadbolt Specs - Adjustable Backset to fit 2 3/8" or 2 3/4" door prep. - Fits standard 2 1/8" bore hole - 1" cross bore - Standard Installation Fitting - Replaces most existing locks.

Available Finishes Polished Brass Antique Brass Venetian Bronze Satin Nickel Satin Chrome Rustic Pewter Rustic Bronze Iron Black Polished Chrome Antique Nickel

Single Cylinder Deadbolts are unlocked with a key on one side and unlocked from the inside of the home with a thumbturn. Most exterior doors use a combination of one deadbolt, and a keyed lever handle or door knob.

Product Features

• Solid forged brass construction
• Functions available: keyed entry, privacy, passage, full dummy, half dummy
• Customize with your choice of rosette and finish
• Features easy-to-install spring assisted chassis for optimal operational strength
• Fits standard door prep - 2-1/8" cross bore with 1" edge bore
• Accommodates door thickness 1-3/8" to 2". Up to 2-1/2" thick door with service part kit
• Keyed entry featuring Baldwin pin and tumbler C-keyway
• Adjustable backset latch fits 2-3/8" or 2-3/4" pre-bored doors
• Square corner strike and faceplate are standard. Rounded corner or drive in latch available upon request
• Limited Lifetime Mechanical Warranty and Limited 25 Year Finish Warranty

Product Features

• Solid forged brass construction
• Functions available: keyed entry, privacy, passage, full dummy, half dummy
• Customize with your choice of rosette and finish
• Features easy-to-install spring assisted chassis for optimal operational strength
• Fits standard door prep - 2-1/8" cross bore with 1" edge bore
• Accommodates door thickness 1-3/8" to 2". Up to 2-1/2" thick door with service part kit
• Keyed entry featuring Baldwin pin and tumbler C-keyway
• Adjustable backset latch fits 2-3/8" or 2-3/4" pre-bored doors
• Square corner strike and faceplate are standard. Rounded corner or drive in latch available upon request
• Limited Lifetime Mechanical Warranty and Limited 25 Year Finish Warranty

Product Features

• Solid forged brass construction
• Functions available: keyed entry, privacy, passage, full dummy, half dummy
• Customize with your choice of rosette and finish
• Features easy-to-install spring assisted chassis for optimal operational strength
• Fits standard door prep - 2-1/8" cross bore with 1" edge bore
• Accommodates door thickness 1-3/8" to 2". Up to 2-1/2" thick door with service part kit
• Keyed entry featuring Baldwin pin and tumbler C-keyway
• Adjustable backset latch fits 2-3/8" or 2-3/4" pre-bored doors
• Square corner strike and faceplate are standard. Rounded corner or drive in latch available upon request
• Limited Lifetime Mechanical Warranty and Limited 25 Year Finish Warranty

Baldwin Estate Series hardware is the ultimate in style and flexibility. At Direct Door Hardware we put together a kit for you including all the parts you will need for your specific application. The price on this page is for one complete set including knobs, rosettes, tubular latch, spindle, door prep adaptor (if needed), strike plate, face plate and fasteners (dummy knobs do not include latch or strike/faceplates). These items are also available for purchase a la carte.

To order your Baldwin Estate Series knob set please review the following options:

• Choose a Knob or Lever. This page is for the Baldwin Estate 5041 knob (see 5041 knob specifications). The Baldwin Estate knobs are constructed of solid forged brass material, finished and polished by hand. The 5000 knob is available in 21 rich finishes. All finishes may not be in stock. Call us for availability, non-stock items normally take about 4 weeks to ship.
• Choose a Function. Estate series knob sets with tubular latch are available in 3 functions - passage, privacy, and dummy. The passage function is a regular non-locking knob set for hall or closet doors. Privacy function knob sets are for use on bathhroom or bedroom doors that require a privacy lock when occupied. Estate privacy locks with tubular latch will lock with a push button in the rosette (not all rosettes will work with privacy function). Dummy function knobs are trim only and do not latch - normally used on closets with ball catch or on the inactive side of a double door.
• Choose a Finish. There are many finishes to choose from including distressed and hand relieved finishes. Not all finishes are in stock. (View all available finishes)
• Choose your backset size. (what is backset?) Baldwin Estate locks include a non-adjustable backset latch. You will need to determine what size latch you need. Available backset latches are 2-3/8" or 2-3/4"
• Choose your strike plate. Estate series knob sets include a standard T-strike. You can also choose to have your knob set assembled with a full-lip or ASA strike plate. (whats this?)
• Choose your door thickness. Estate series knob sets will work on a door thickness range of 1-3/8" to 2-1/2". Thick doors require extra parts, make sure you give us the correct door thickness so your knob set will be assembled to fit your door.
• Choose your rosette. Baldwin estate series rosettes are listed below. (what is a rosette?) There are many rosette options. Every rosette may not work with your particular application. Some rosettes are not designed to work with a standard 2-1/8" door prep and require a special door preparation. Some rosettes are not available with the privacy function push pin. Please call us for help selecting an appropriate rosette for your doors 307-886-9449

Baldwin Estate Series hardware is the ultimate in style and flexibility. At Direct Door Hardware we put together a kit for you including all the parts you will need for your specific application. The price on this page is for one complete set including knobs, rosettes, tubular latch, spindle, door prep adaptor (if needed), strike plate, face plate and fasteners (dummy knobs do not include latch or strike/faceplates). These items are also available for purchase a la carte.

To order your Baldwin Estate Series knob set please review the following options:

• Choose a Knob or Lever. This page is for the Baldwin Estate 5055 knob (see 5055 knob specifications). The Baldwin Estate knobs are constructed of solid forged brass material, finished and polished by hand. The 5000 knob is available in 21 rich finishes. All finishes may not be in stock. Call us for availability, non-stock items normally take about 4 weeks to ship.
• Choose a Function. Estate series knob sets with tubular latch are available in 3 functions - passage, privacy, and dummy. The passage function is a regular non-locking knob set for hall or closet doors. Privacy function knob sets are for use on bathhroom or bedroom doors that require a privacy lock when occupied. Estate privacy locks with tubular latch will lock with a push button in the rosette (not all rosettes will work with privacy function). Dummy function knobs are trim only and do not latch - normally used on closets with ball catch or on the inactive side of a double door.
• Choose a Finish. There are many finishes to choose from including distressed and hand relieved finishes. Not all finishes are in stock. (View all available finishes)
• Choose your backset size. (what is backset?) Baldwin Estate locks include a non-adjustable backset latch. You will need to determine what size latch you need. Available backset latches are 2-3/8" or 2-3/4"
• Choose your strike plate. Estate series knob sets include a standard T-strike. You can also choose to have your knob set assembled with a full-lip or ASA strike plate. (whats this?)
• Choose your door thickness. Estate series knob sets will work on a door thickness range of 1-3/8" to 2-1/2". Thick doors require extra parts, make sure you give us the correct door thickness so your knob set will be assembled to fit your door.
• Choose your rosette. Baldwin estate series rosettes are listed below. (what is a rosette?) There are many rosette options. Every rosette may not work with your particular application. Some rosettes are not designed to work with a standard 2-1/8" door prep and require a special door preparation. Some rosettes are not available with the privacy function push pin. Please call us for help selecting an appropriate rosette for your doors 307-886-9449

How to Order Emtek Round Knob with Modern Rosette

Emtek's Round Knobs with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Round Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Round Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty
The Emtek Modern Round door knob is also available in Stainless Steel

Split Finishes. You can order the Emtek Round Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Round Knob handle with Modern Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Round Knob with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Round Knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Norwich Door Knobs with Regular Rosette

Emtek's Norwich door knobs with regular rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Norwich knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Norwich Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Emtek Norwich Door Knob with Regular Rosette Specifications

- Complete set. Includes doorknobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

You can upgrade the Emtek Norwich Knob with Regular Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Lancaster Door Knobs with Regular Rosette

Emtek's Lancaster door knobs with Regular rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Lancaster knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Lancaster Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Lancaster knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Lancaster Door Knob with Regular Rosette Specifications

- Complete set. Includes doorknobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Lancaster Knob with Regular Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Lancaster knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Lancaster Door Knobs with Ribbon & Reed Rosette

Emtek's Lancaster door knobs with Ribbon & Reed Rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Lancaster knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Lancaster Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Lancaster knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Lancaster Door Knob with Ribbon & Reed Rosette Specifications

- Complete set. Includes doorknobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Lancaster Knob with Ribbon & Reed Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Lancaster knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Melon Door Knobs with Regular Rosette

Emtek's Melon door knobs with Regular rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Melon knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Melon Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Melon knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Melon Door Knob with Regular Rosette Specifications

- Complete set. Includes doorknobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Melon Knob with Regular Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Melon knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Providence Door Knobs with Regular Rosette

Emtek's Providence door knobs with Regular rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Providence knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Providence Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Providence knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Providence Door Knob with Regular Rosette Specifications

- Complete set. Includes doorknobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Providence Knob with Regular Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Providence knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Ribbon & Reed Door Knobs with Rope Rosette

Emtek's Ribbon & Reed door knobs with Rope rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Ribbon & Reed knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Ribbon & Reed Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Ribbon & Reed knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Ribbon & Reed Door Knob with Rope Rosette Specifications

- Complete set. Includes doorknobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Ribbon & Reed Knob with Rope Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Ribbon & Reed knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Rope Door Knobs with Regular Rosette

Emtek's Rope door knobs with Regular rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Rope knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Rope Knob with other rosette options

Finishes. With seven finishes to choose from Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Rope knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Rope Door Knob with Regular Rosette Specifications

- Complete set. Includes doorknobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Rope Knob with Regular Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Rope knob with CF upgrade.

Available Finishes
	Oil-Rubbed Bronze
	Satin Nickel
	Polished Brass
	Pewter
	Polished Chrome
	French Antique
	Lifetime Polished Brass

Dont forget your...

Emtek Deadbolts >>

Emtek Handlesets >>

Emtek Keyless Locks >>

Emtek Multi-point Trim >>

Emtek Door Hinges >>

Emtek Bath Hardware >>

How to Order Emtek Victoria Door Knobs with Regular Rosette

Emtek's Victoria door knobs with Regular rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Victoria knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Victoria Knob with other rosette options

Finishes. With four finishes to choose from Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Victoria knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Victoria Door Knob with Regular Rosette Specifications

- Complete set. Includes doorknobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Victoria Knob with Regular Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Victoria knob with CF upgrade.

Available Finishes
	Oil-Rubbed Bronze
	Satin Nickel
	Polished Brass
	French Antique

Dont forget your...

Emtek Deadbolts >>

Emtek Handlesets >>

Emtek Keyless Locks >>

Emtek Multi-point Trim >>

Emtek Door Hinges >>

Emtek Bath Hardware >>

How to Order Emtek Waverly Door Knobs with Regular Rosette

Emtek's Waverly door knobs with Regular rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Waverly knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Waverly Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Waverly knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Waverly Door Knob with Regular Rosette Specifications

- Complete set. Includes doorknobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Waverly Knob with Regular Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Waverly knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Milano Lever Handles with Regular Rosette

Emtek's Milano lever handles with Regular rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's American Classic collection of door hardware provides the traditional look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Milano lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Milano lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Milano lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Milano lever handle with Regular Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Milano Lever Handles with Regular Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Milano Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Round Knob with Disk Rosette

Emtek's Round Knobs with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Round Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Round Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty
The Emtek Modern Round knob is also available in Stainless Steel

Split Finishes. You can order the Emtek Round Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Round Knob handle with Disk Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Round Knob with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Round Knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Bern Knob with Modern Rosette

Emtek's Bern Knobs with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Bern Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Bern Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Bern Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Bern Knob handle with Modern Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Berned corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Bern Knob with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Bern Knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

Emtek's Bern Knobs with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Bern Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Bern Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Bern Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Bern Knob handle with Disk Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Berned corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Bern Knob with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Bern Knob with CF upgrade.

How to Order Emtek Octagon Knob with Modern Rosette

Emtek's Octagon Knobs with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Octagon Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Octagon Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Octagon Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Octagon Knob handle with Modern Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with Modern corner mortise plates and strike plate. Octagoned corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Octagon Knob with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Octagon Knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Octagon Knob with Disk Rosette

Emtek's Octagon Knobs with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Octagon Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Octagon Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Octagon Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Octagon Knob handle with Disk Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with Disk corner mortise plates and strike plate. Octagoned corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Octagon Knob with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Octagon Knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Orb Knob with Modern Rosette

Emtek's Orb Knobs with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Orb Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Orb Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Orb Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Orb Knob handle with Modern Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with Modern corner mortise plates and strike plate. Orbed corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Orb Knob with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Orb Knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Orb Knob with Disk Rosette

Emtek's Orb Knobs with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Orb Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Orb Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Orb Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Orb Knob handle with Disk Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with Disk corner mortise plates and strike plate. Orbed corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Orb Knob with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Orb Knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Square Knob with Modern Rosette

Emtek's Square Knobs with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Square Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Square Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Square Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Square Knob handle with Modern Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with Square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Square Knob with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Square Knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Square Knob with Disk Rosette

Emtek's Square Knobs with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern Brass collection of door hardware provides the sleek modern look you're after for your home. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Square Knob is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Square Knob with other rosette options

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Square Knob with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Square Knob handle with Disk Rosette Specifications

- Complete set. Includes Knobs and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request) Optional 28 degree limited rotation latch.
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Square Knob with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Square Knob with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks

Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Athena Lever Handles with Modern Rosette

Emtek's Athena lever handles with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Athena lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Athena lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty
The Emtek Athena lever is also available in Stainless Steel

Split Finishes. You can order the Emtek Athena lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Athena lever handle with Modern Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Athena Lever Handles with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Athena Lever with CF upgrade.

Stainless Steel Athena lever with CF upgrade

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Athena Lever Handles with Disk Rosette

Emtek's Athena lever handles with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Athena lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Athena lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty
The Emtek Athena lever is also available in Stainless Steel

Split Finishes. You can order the Emtek Athena lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Athena lever handle with Disk Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Athena Lever Handles with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Athena Lever with CF upgrade.

Stainless Steel Athena lever with CF upgrade

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Basel Lever Handles with Disk Rosette

Emtek's Basel lever handles with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Basel lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Basel lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Basel lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Basel lever handle with Disk Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Basel Lever Handles with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Basel Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Geneva Lever Handles with Modern Rosette

Emtek's Geneva lever handles with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Geneva lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Geneva lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Geneva lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Geneva lever handle with Modern Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Geneva Lever Handles with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Geneva Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Hercules Lever Handles with Modern Rosette

Emtek's Hercules lever handles with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Hercules lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Hercules lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Hercules lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Hercules lever handle with Modern Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Hercules Lever Handles with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Hercules Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Hercules Lever Handles with Disk Rosette

Emtek's Hercules lever handles with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Hercules lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Hercules lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Hercules lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Hercules lever handle with Disk Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Hercules Lever Handles with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Hercules Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Hermes Lever Handles with Disk Rosette

Emtek's Hermes lever handles with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Hermes lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Hermes lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Hermes lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Hermes lever handle with Disk Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Hermes Lever Handles with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Hermes Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Helios Lever Handles with Modern Rosette

Emtek's Helios lever handles with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Helios lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Helios lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Helios lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Helios lever handle with Modern Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Helios Lever Handles with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Helios Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Helios Lever Handles with Disk Rosette

Emtek's Helios lever handles with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Helios lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Helios lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Helios lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Helios lever handle with Disk Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Helios Lever Handles with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Helios Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Luzern Lever Handles with Modern Rosette

Emtek's Luzern lever handles with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Luzern lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Luzern lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Luzern lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Luzern lever handle with Modern Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Luzern Lever Handles with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Luzern Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Luzern Lever Handles with Disk Rosette

Emtek's Luzern lever handles with Disk rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Luzern lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Luzern lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Luzern lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Luzern lever handle with Disk Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Luzern Lever Handles with Disk Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Luzern Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Mercury Lever Handles with Modern Rosette

Emtek's Mercury lever handles with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Mercury lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Mercury lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Mercury lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Mercury lever handle with Modern Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Mercury Lever Handles with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Mercury Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware

How to Order Emtek Mercury Lever Handles with Modern Rosette

Emtek's Mercury lever handles with Modern rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek's Modern hardware collection of door hardware provides the contemporary look you're after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Mercury lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)
Show me the Mercury lever with other rosette options

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty

Split Finishes. You can order the Emtek Mercury lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time.

Emtek Mercury lever handle with Modern Rosette Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Standard door preparation
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Mercury Lever Handles with Modern Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Mercury Lever with CF upgrade.

Dont forget your...

Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks
Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware