Need Help? We're Here Mon-Fri 9-5 Mtn Time: 307-886-9449
Or text 307-275-9700

PHG 4 Inch Grade I Spring Hinges for Therma-Tru (pair) - RIGHT HAND

12 Review(s) Write a Review Write a Review
PHG 4 Inch  Grade I Spring Hinges for Therma-Tru (pair) - RIGHT HAND
PHG 4 Inch Grade I Spring Hinges for Therma-Tru (pair) - RIGHT HAND


How to determine if you need a left hand or a right hand hinge.

Open the door and look directly at the hinged side of the jamb (back to the strike). Then compare your hinge to our handing template. This listing is for the RIGHT hand hinge which has the rounded corners on the right leaf. Your hinges could be mounted upside down, so please do not order these hinges without comparing to this template.

Sold in PAIRS and includes matching screws  
4" x 4" Spring Hinges Available Finishes

This hinge is for residential applications only. All steel base material. Single-Acting. Heavy 0.106" Gauge thickness.

TS48 Residential Door Hinge Specs
4" x 4"
#10 x 3/4" WOOD SCREWS


Off White Yellow Zinc Polished Brass Satin Nickel
Satin Chrome Black Nickel Oil Rubbed Bronze Satin Brass
*Above images do not represent this product. They are intended to show available finish options only.



Sold in PAIRS and includes matching screws

Choose Options:

Screw Type
Price (USD)$20.13

Ships Direct From PHG. Please allow 3-4 Days Before Shipment.

Order Help

All About Residential Door Hinges  

There are many types of door hinges available for different applications on residential doors. This guide and the charts at right are intended to help you select the appropriate hinges for your door and is stated as suggestion only.
The best way to replace existing hinges is to buy the same size and quantity of hinges you already have on your door. Below are a few things to consider before buying hinges for a new door or replacing old hinges.

Hinge Material
Door hinges are generally made in three types of material. The most commonly used is steel. Steel Hinges are very strong and inexpensive. They are usually plated with other materials (brass, nickel, bronze), and are available in many finish options. Solid Brass Hinges are also strong but will not rust or corrode as steel will over time. Solid brass hinges have the most beautiful appearance and can outlast steel plated hinges by many years. Stainless Steel Hinges are stronger than steel and are resistant to rusting and are available in a brushed or polished stainless finish.

Hinge Bearing Types

Many door hinges for standard applications are plain bearing hinges, meaning that the hinge knuckles bear on each other. Plain bearing hinges are less expensive and work great for lighter or limited use doors. Hinges do wear out over time especially on high-use doors and heavy or wide doors such as an entry door. An upgrade to the plain bearing hinge is the Ball Bearing Hinge which has small ball bearings between the hinge knuckles to reduce friction. Ball bearing hinges increase the life of the hinge, tend to be quieter, and make the door easier to open.
Door Thickness Hinge Size
1-3/8" 3-1/2" x 3-1/2" Hinges
1-3/4" 4" x 4" Hinges
2" 4-1/2" x 4-1/2" Hinges
2-1/4" to 2-3/4" 5" x 5" Hinges
over 2-3/4" 6" x 6"


Door Height Number of Hinges
Up to 60" 2 Hinges
60" to 80" 3 Hinges
80" to 97" 4 Hinges
97" to 109" 5 Hinges
Over 109" 6 Hinges

Heavy Duty Hinges
Hinges are sometimes catagorized as standard or residential duty hinges and heavy duty hinges. The difference between a standard duty hinge and a heavy duty hinge is the thickness of the plate material the hinge is made of. Heavy duty hinges can be used for doors that are heavier or wider. Ball bearing hinges are an upgrade from heavy duty hinges and are also constructed of thicker material.

Door Hinge Corners
There are three styles of door hinge corners. Square, 1/4" radius corner, and 5/8" radius corner. For a good fit, make sure you get the right hinge corner style for your door. You can use some spare change to determine the radius on your hinges. The 1/4" radius is close to the size of a dime if you hold it up to the corner of the hinge. A 5/8" radius is close to the size of a quarter. On wood doors you can always "square" the corners on your door and jamb with a sharp chisel.
Some hinges are square on one leaf and rounded on the other. This hinge is frequently used for steel or fiberglass doors hung on a wood jamb. These hinges are available in several finishes and they are handed so you'll want to make sure you order accordingly.

Spring Loaded Door Hinges

Spring Door Hinges are used to create a self closing door. Some areas require a fire door between a garage and living area to be self closing. These hinges are heavy duty steel hinges and are available in many finishes. You can adjust the tension on the spring for door size and weight. Most exterior doors will require two spring hinges to close properly.

Non-removable Hinge Pin (NRP)
Non-removable pins are used on the hinges of outswinging doors to prevent intruders from tapping out the hinge pins and pulling the door off it's hinges. The hinge pin will have a groove in it which is locked in place by a set screw. The set screw is positioned so that it can only be accessed when the door is opened. Any of our Emtek Hinges (except Emtek spring hinges) can be ordered with non-removable pins.
Hinge Accessories
We have many hinge accessories available to create your own custom look including hinge pin ball tips, steeple tips, and hinge pin door stops.


Recently Viewed Hardware

Customer Reviews

1 Stars
The wrong color was sent. I ordered oil rubbed bronze and received bronze.
Did you find this helpful? 
Reviewed by:  from STILLWATER. on 2/26/2019
5 Stars
Seems to be working fine the spring hinges so far only had a short time so far but all is well
Did you find this helpful? 
Reviewed by:  from DOWNINGTOWN. on 10/29/2018
5 Stars
These hinges work great would recommend them
Did you find this helpful? 
Reviewed by:  from San Antonio, Texas . on 6/2/2018
5 Stars
Truck Driver
These appear to be well-made spring hinges. I haven't installed them, yet, but I'm sure they'll operate well.
Did you find this helpful? 
Reviewed by:  from Fort Lauderdale. on 2/15/2016
5 Stars
Easy to install, fit in existing holes, works as expected!
Did you find this helpful? 
Reviewed by:  from Indidna. on 12/21/2015
5 Stars
This is exactly what we had been looking for. Easy to install and adjust. We recommend these spring hinge to all who need spring hinges.
Did you find this helpful? 
Reviewed by:  from Magnolia Terrace -Greenville, MS 38701. on 1/9/2015
5 Stars
Replaced 20 year old original brass Therma-Tru spring hinges on garage entry door along with standard hinges on both entry & interior doors. These hinges work great and assure a secure solid self seal when exiting the home. Direct Door got these to me in no time & as usual, did a great job.
Did you find this helpful? 
Reviewed by:  from Atlantic City, NJ. on 12/11/2013
5 Stars
Property Manager
Prefect fit and replacement . Easy to install and adjust. fast delivery
Did you find this helpful? 
Reviewed by:  from Chicago. on 10/18/2013
5 Stars
PHG 4" Grade I Spring Hinges for Therma-Tru (pair)
So far so great! I am really satisfied with the total purchase, shipment and installation. Hinges fit perfectly and work very well.
Did you find this helpful? 
Reviewed by:  from Utah. on 2/18/2013
2 Stars
Ordered these hinges because we are changing our woodwork to white. The hinge say they are white. When I received them, they were grey. Company says that is the way they are suppose to be. They are just primed, and you have to paint them white yourself.
Did you find this helpful? 
Reviewed by:  from Savage, MN. on 9/26/2012
5 Stars
Door Hardware
I ordered spring hinges and found shipment was fast and accurate. All the hardware needed to install the products were included. will shop with door hardware in thefuture
Did you find this helpful? 
Reviewed by:  from New york. on 6/26/2012
5 Stars
Still worked on my ancient Therma-Tru Door
House was built in 1988 so some things may have changed with the Therma-Tru specs. This pair fit perfectly except the rounded corner didn't exactly match the radius of the cut-out in the steel frame but I didn't care about that as long as the screw holes lined up. Also had to user original door screws as the new ones were too big.
Did you find this helpful? 
Reviewed by:  from Maryland. on 2/6/2012