Need Help? Call Us Mon-Fri 9-5 Mtn Time: Call 307-886-9449
Or Text 307-275-9700

Kwikset 5" Backset Deadbolt Latch

Write a Review Write a Review
Kwikset 5
Kwikset 5" backset Deadbolt Latch

Helpful Information

*Not compatible with Kwikset Modern Style Deadbolts or Kwikset Keyless Locks.

Description

Kwikset 5" Backset Deadbolt Latch

Kwikset's 5" deadbolt latch is available in Polished Brass, Satin Chrome or Antique brass finish. Only works with Kwikset brand door hardware.

Choose Options:

SKU :82730
Finish
Price (USD)$13.43
showHelp

Articles

Recently Viewed Hardware

[productqa_] Questions and Answers

Question Will this work with a Defiant door knob?
Asked by: Sterling - 6/29/2015
Question My guess is that a Defiant knob will not like this latch at all :-)

No, as far as I know these will only work with Kwikset brand locks.
Answer provided by:  Jake (6/29/2015)
Question Hi, I am looking for a complete one-sided deadbolt assembly with a thumbturn and a 5 inch backset. All I see is the latch. Can you help me? Thanks, Bob
Asked by: Bob R - 11/1/2015
Question Unfortunately we do not have a single sided deadbolt that would work with a 5" backset. The latches on the single sided units are different. Answer provided by:  Jake (11/2/2015)
Question I need a 5 in backset with 2 holes for the screws holding the handle and a 3/8 by 3/8 square opening for the shaft. Do you have it? Regards
Asked by: Dan - 6/30/2018
Question This 5" backset does have two screws on the faceplate but the spindle hole is not 3/8". This is meant to fit Kwikset brand hardware. We have not tested it with any other brand. Answer provided by:  Jake (7/2/2018)
Question I'm considering buying a Kwikset Halo keyless smart lock. Problem: My door is old. And it has a 5" backset spacing. Will the Kwikset 82730 5" deadbolt latch be compatible with it?
Asked by: Pete - 2/6/2023
Question No, Im sorry. Schlage and Kwikset offer this 5" latch for people like you with older homes when this installation was common. Unfortunately, none of their new products like keypad deadbolts are designed to be compatible with the 5" latch. To accomplish what you want, you'll need to patch/repaint and re drill the bore hole at the proper backset. Alternatively, you could replace the door if you need an excuse to do that. Answer provided by:  Zach (2/6/2023)
Question can you remove the rectangle plate and have a drive in latch?
Asked by: gloria - 1/22/2016
No Answers have been submitted yet.
Hello Guest, Login Hello Guest! Logout
Information