Most Popular Door Accessories
See All Door Hardware Brands >>
Most door hardware products are design to fit standard door preparation as illustrated on the left. If you have something different, please start with our hardware replacement guide at the link below.
Inox NY Handleset
Inox's New York handleset is the perfect mix of security and modern looks. It features strong steel components and the combination of smooth, round curves and sharp square corners. There are multiple finishes to choose from and you can get a single cylinder active handleset or non-active dummy handleset.
Lever Handle Specs
- Fits doors 1 3/8" - 1 3/4" Thick.- Latches are not adjustable, select backset upon adding to cart.- Concealed fastening system.- Spring assisted chassis- Available in Satin Stainless Steel, Polished Stainless Steel and Oil Rubbed Bronze Plating on Stainless Steel.
Single Cylinder Handleset Contents A thumbpress handle with key cylinder on the exterior, your choice of lever on the interior along with a thumbturn for the deadbolt, latch mechanisms, strike plates and mounting screws.
Dummy Handlesets Contents A thumbpress handle on the exterior, your choice of lever on the interior, strike plates and mounting screws.
Measurements for Inox New York Handleset
For the New York Handleset for Tubular Latch Mounting the CC on the bore holes is 5 1/2" CC with a measurement of 7 9/32" from the lower bore hole down to the bottom mounting hole of the handle.
For the New York Mortise handleset (requires special door prep for the large mortise box in the edge of the door) it is mounted differently so there are more holes required.
