Need Help? We're Here Mon-Fri 9-5 Mtn Time: 307-886-9449
Or text 307-275-9700

Emtek Configuration 6 Sandcast Arched 1 1/2 x11 Multi Point Lock Trim Only

0 Review(s) Write a Review Write a Review
Emtek Configuration 6 Sandcast Arched 1 1/2 x11 Multi Point Lock Trim Only
Emtek Configuration 6 1 1/2" x 11" Arched Sandcast Multipoint Lock Trim

Helpful Information

Direct Door Hardware Shipping Timeframe for EmtekEmtek Is Assembled Specifically to Your Chosen Options

Please Allow 10-14 Days Before Shipping. This is an estimate, not a guarantee as the assembly time can fluctuate according to current workload. Need it Faster? Please Contact Us for Expedited Options


Part Numbers for Emtek Sandcast Arched 1 1/2 x 11 Multi-Point Trim - Configuration 6

Keyed American Cylinder - 1611
Non-Keyed Passage - 1612
Non-Keyed American Style Thumbturn Inside - 1613
Non-Keyed / Fixed Outside, Operable Inside - 1614
Dummy Pair - 1615


NOTE: Patio Locksets DO NOT include internal latch mechanisms. Be sure to select correct configuration to match up with your brand of door so this hardware will be compatible. This set WILL NOT fit doors prepped with standard bore holes 2 1/8" Dia spaced 5 1/2" apart. These sets are designed for multi point locking doors that already have an internal mechanism.

Emtek Configuration 6 Sandcast Arched 1 1/2" x11" Multi Point Lock Specs


Emtek Sandcast Bronze Door Hardware is made of solid bronze cast into authentic rustic designs. Patina finishes are achieved using traditional techniques of the sculptor.

Emtek Door Hardware Includes:
- Set includes plates, handles, and cylinders (where applicable).
- Sets fit standard door thickness of 1 3/4", specify if different.

Available levers shown at bottom of page

Finish Samples
Tumbled White Bronze Medium Bronze Flat
Configuration 6 Assembly Drawing

Configuration 1 Patio Locks are available with the following interior door knob or lever handle options:
Emtek Aurora Lever Emtek Durango Lever Emtek Cimarron Lever Emtek Cody Lever Emtek Montrose Lever Emtek Teton Lever
Aurora Lever Durango Lever Cimarron Lever Cody Lever Montrose Lever Teton Lever

Designed to Fit: Pella Patio Doors

Choose Options:

SKU :CF6-9
Function help
Lever Style
Door Handing help
Door Thickness
Retail Price: $272.00
Price (USD)$229.84

Custom assembled. Please allow 10-14 business days before shipping. Lead time may fluctuate due to COVID delays. Call 307-886-9449 to expedite.

Order Help

Emtek Multi Point Lock Functions

Keyed Cylinder Configuration

Keyed with American Cylinder
This function uses a thumbturn on the inside to lock or unlock the door, and requires a key for entry from the outside. This is most common for exterior patio doors that need to be locked.

Non-Keyed Passage Configuration Non-Keyed Passage
Non keyed passage functions are for patio doors that do not need to lock at all, but levers are needed for operating the latch mechanism.
Non-Keyed with Inside Thumbturn Configuration

Non-Keyed, Thumbturn Inside
This function allows you to lock the door with a thumbturn on the inside, but you cannot unlock it from the outside. Access from the outside is only possible when unlocked with thumbturn from the inside.

Non-Keyed with Fixed Outside Handle Configuration

Non-Keyed, Fixed Handle Outside
This function is often used on the side of a french door that is generally not active. The inside lever is operable from the inside so that you can unlatch the door when you want both open, but the lever is fixed from the outside preventing it from being unlocked from outside.

Dummy Configuration Dummy
This function would be used on the side of a french door where the door is not active, or does not use a multi point mechanism to keep it closed. Dummy functions are purely for cosmetic reasons and really have no function.


Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

Recently Viewed Hardware