Need help finding the right Door Hardware for your application? We'd love to help. Our showroom hours are Monday - Friday 9-5 Mountain time. Give us a call or send us an email by clicking on the contact us link below.
Door Hardware Basics
Most door hardware will fit the following door preparation. If you have something different, please contact us so we can help you find exactly what you need.
Part Numbers for Brighton Entrance Handleset
Single Cylinder - 451923Double Cylinder - 452923Dummy - 450923
Emtek Entrance Handlesets
Emtek Brighton Handleset Includes: - Complete set. Includes large entry handle and deadbolt for exterior, knob or lever and backplate for interior, latchbolt, face plate, strike plate and mounting hardware. - Standard 2 1/8" door preparation - Schlage C Keyway - Shipped with square corner mortise plates and strike plate. Rounded corner available upon request. - Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
The Emtek Brighton Handleset Includes:
- Large handleset for the exterior side of the door.- Interior lever or knob style and backplate for the interior side.- Latchbolt with mounting hardware and faceplate.- Strike plate for door jamb.- Other required mounting screws or hardware.
Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.
Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.
Measurements for Emtek Brighton Tubular Entrance Handleset
This handleset is made of sandcast bronze and has a living finish which means that it will change over time as the handleset is used. If you are standing outside the door looking at it, if the hinges are on the left you need a left hand handleset.
See how to determine door handing
Single cylinder handleset has a thumbturn on the inside and a key cylinder outside. This is the most common type purchased. Double cylinder has a key cylinder on both sides - this is not recommended in most circumstances because if there were an emergency you would have to find a key to exit.
As far as duties and taxes to Melbourne, you'll need to add the items you need and begin the checkout process with your shipping address and it will calculate that cost.