Emtek Stainless Steel Dresden Lever with Disk Rosette

Emtek Stainless Steel Cologne Lever Handle Functions

Emtek Lever Handles are available in several functions. Please review the descriptions below so you can order the correct door lever for your application.

	Emtek Passage or Hall and Closet Lever Handlesare used on doors that do not require a locking mechanism. Halls, closets, pantry or laundry doors will generally use a passage leverset. Passage levers do not have a locking mechanism.
	Emtek Privacy or Bed and Bath Door Levers are most often used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Emtek privacy levers have a push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some levers will have a pin hole inside a circular piece, some just have a small pinhole.
	Emtek Double Dummy Door Levers are sold in pairs. Dummy levers do not have a latch or mechanism of any kind. These levers are surface mounted to a door that has not been bored (large hole cut out) for a lever. Dummy leverss are generally used on double doors that us a ball catch at the top to keep them closed so a latch is not required. They are also commonly found on the inactive side of a french door - a single dummy mounted on either side of the inactive door.
Emtek Keyed Levers	Not all Emtek knob and levers are available in a keyed function. For your exterior doors you may consider and Emtek passage knob or lever used with an Emtek deadbolt above, or and Emtek Sideplate Lock which incorporates the lever and deadbolt with one larger decorative backplate.

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

Measurements for Emtek Stainless Steel Dresden Lever with Disk Rosette

Measurement image is to illustrate dimensions only and may not be the same handing, finish or function as the item listed for sale on this page.