Posted by DDH Staff on 3/29/2024 to Tips

Emtek has door knobs to fit 3/4" door prep, with great-looking styles. But what makes these Emtek knobs different from regular door knobs? Well, standard door prep will have a 2 1/8" bore hole, but these guys are made to fit 3/4" bores. Yeah... they are tiny little guys! The rosettes (or backplate) are smaller than your standard door knob rosette. The door knobs feature a small rosette for a custom, low-profile appearance. They also have a small 2" diameter knob with a 2" diameter rosette. They include a premium 28° latch and are available in privacy or passage functions.

How to Install Emtek Small Knobs

Adding small door knobs can instantly improve the aesthetic appeal and functionality of your doors. Whether you're upgrading your home's interior or starting a renovation project, installing these door knobs is a pretty straightforward task that anyone can complete with the right tools and guidance. In this step-by-step guide, we'll walk you through the process of installing small door knobs from Emtek like a professional.

Materials Needed:

  • Small Emtek door knob set
  • Phillips screwdriver
  • Flathead screwdriver
  • Tape measure
  • Pencil
  • Door latch mechanism (if not included with the door knob set)
  • Screws (if not included with the door knob set)
  1. Prepare the Door: Begin by making sure that the door is clean and free of any debris or obstructions. If you're replacing an existing door knob, remove it by unscrewing the screws that you’ll find on the interior side of the door. Once the old knob is removed, look at the door latch mechanism to make sure it's in good condition. If you need to, replace it with a new latch mechanism compatible with your Emtek door knob set.

  2. Position the Door Knob: Next, figure out the desired height for the door knob on the door. Typically, door knobs are installed approximately 36 inches above the floor because it’s the most accessible and comfortable height. Use a tape measure and pencil to mark the center of the door where the door knob will be installed.

  3. Install the Latch Mechanism: If the door knob set includes a latch mechanism, insert it into the edge of the door according to the manufacturer's instructions. Make sure that the latch mechanism is aligned correctly and flush with the edge of the door. Secure it in place using the provided screws.

  4. Attach the Exterior Knob: Take the exterior knob of the Emtek door knob set and insert the spindle through the latch mechanism from the exterior side of the door. Align the screw holes on the exterior knob with the matching holes on the interior knob.

  5. Install the Interior Knob: Place the interior knob over the spindle from the interior side of the door, making sure it aligns correctly with the exterior knob. Insert the screws provided with the door knob set into the screw holes on the interior knob and tighten them securely using a Phillips screwdriver.

  6. Test the Door Knob: Once the door knob is installed, test it to make sure it operates smoothly and securely. Turn the knob to engage the latch mechanism and confirm that the door opens and closes without any resistance or sticking.

Mastering the Installation of Emtek Small Knobs

With this guide, installing small door knobs is a breeze. By following these instructions and using the right tools, you can get professional-quality results and enjoy the upgraded beauty and functionality of your doors for years to come. And if you’re on the hunt for new knobs, you can easily shop Emtek door knobs by style right here on our website.