Emtek Passage Pocket Door Hardware

ID #3611
7 Review(s) Write a Review Write a Review
Emtek Passage Pocket Door Hardware
Emtek Passage Pocket Door Hardware

Helpful Information

Custom assembled. Please allow 7-10 business days before shipping. Expedited options at checkout.
SKU : 2101
Finish
Retail Price: $44.00
$37.18
-
+

Custom assembled. Please allow 7-10 business days before shipping. Expedited options at checkout.
showHelp

Description

Pocket door hardware mounts inside your door flush so your door will slide into its "pocket" in the wall without catching. Closing the door is easy. Just push on the top of the rectangular piece on the edge of the pocket door hardware. The bottom of the rectangular piece will come out for you to grab and you can close it.

Please Note: the Passage Pocket Door Hardware does not include a strike plate. For hardware with a latch and strike plate, see the Privacy Pocket Door Hardware.

Height: 3-1/2"
Width: 2-3/8"

ADJUSTABLE -- fits 1-3/8" to 1-3/4" thick doors.
Emtek Pocket door hardware door prep
Door Preparation:
Door needs to be notched 3 1/8" in height and 1 3/4" deep in from the edge of the door.

Other

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

Recently Viewed Hardware

Customer Reviews

2 Stars
Nice, but...
The color is nice the size, length wise, is shorter than the brass one we replaced. Also the inside where you put your fingers to close the door is sloped so it is hard to get a good grip when closing the pocket door.
Did you find this helpful?  4 of 4 Found Helpful
Reviewed by:  from Tulsa, OK. on 3/7/2015
2/5
3 Stars
retired
It seams the concave area wasn't made deep enough and the screw in that area hits the tip of the fingers when closing the door. Thus, creating some slippage and discomfort. I gave the design three stars. Thanks
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Austin, Tx. on 4/12/2016
3/5
3 Stars
Mr
Everything appears first rate on this piece. The issue I have with it is that it requires a complicated cut into the door that was not visible to me prior to purchase. My door is already hung (in the house when I bought it) and not possible to remove or at least not without substantial deconstruction. So I must make this complicated cut with the door in a vertical, hung position. I've not mustered the courage yet to attempt it. So, I'll have to provide an update once I've gone through this trial.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Tenn. on 5/5/2015
3/5
3 Stars
EMTEK EM2101
Product looks great and was easy to install. Closing the door without the use of the retractable puller is difficult. The indent should be more pronounced on the metal handleso your fingers do not slip off / out of the handle indent
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Ohio. on 5/16/2011
3/5
3 Stars
Replacement
I loved the look when buying and when receiving. I wish that I read the 2015 review. Same problem, The side depression is too sloped and impractical for gripping. Also pay attention to the dimensions. This unit is much smaller than old hardware for replacement. I spent considerable effort making a fill patch. Adjustments are nice for a very solid fit.
Did you find this helpful? 
Reviewed by:  from NEW BERLIN. on 12/31/2020
3/5
5 Stars
Remodeler
Great company and great product
Did you find this helpful?  0 of 1 Found Helpful
Reviewed by:  from Park Ridge. on 5/22/2018
5/5
5 Stars
Pocket Door handle
They were just as I ordered and worked great!
Did you find this helpful? 
Reviewed by:  from Northern California. on 3/7/2013
5/5

[productqa_] Questions and Answers

Question Can i order the emtek 2101 pocket door hardware with a split finish?
Asked by: Michael - 3/25/2015
Question The Emtek pocket door locks are not available with split finish Answer provided by:  Josh (3/25/2015)
Question Is French antique same as antique brass ?
Asked by: Chad - 5/27/2015
Question The Emtek french antique finish is very close to what other's call antique brass Answer provided by:  Josh (5/27/2015)
Question is there any projection of the piece from the door as my space to close the door in the pocket is tight ?
Asked by: drG - 2/28/2016
Question There is a slight projection. It will be right around 1/16". Answer provided by:  Jake L (2/29/2016)
Question Hi, Is the Emtek Passage Pocket Door Hardware available in split finishes? I would like oil rubbed bronze on the exterior and chrome on the interior for bathroom pocket doors. Thank you.
Asked by: frank - 1/16/2025
Question I'm sorry, this is not available in a split finish. You could order one of each finish and mix the parts maybe, but we do not sell them as a split finish. Answer provided by:  Jake (1/17/2025)
Hello Guest, Login Hello Guest! Logout
Information