Emtek Privacy Pocket Door Hardware

ID #3612
6 Review(s) Write a Review Write a Review
Emtek Privacy Pocket Door Hardware
Emtek Privacy Pocket Door Hardware

Helpful Information

Custom assembled. Please allow 7-10 business days before shipping. Expedited options at checkout.
SKU : 2102
Finish
Retail Price: $59.00
$49.85
-
+

Custom assembled. Please allow 7-10 business days before shipping. Expedited options at checkout.
showHelp

Description

Pocket door hardware mounts inside your door flush so your door will slide into its "pocket" in the wall without catching. Closing the door is easy. Just push on the top of the rectangular piece on the edge of the pocket door hardware. The bottom of the rectangular piece will come out for you to grab and you can close it.

Please Note: the Privacy Pocket Door Hardware includes a strike plate and a latch. For non-locking hardware, see the Passage Pocket Door Hardware.

Height: 3-1/2"
Width: 2-3/8"

ADJUSTABLE -- fits 1-3/8" to 1-3/4" thick doors.
Emtek Pocket door hardware door prep
Door Preparation:
Door needs to be notched 3 1/8" in height and 1 3/4" deep in from the edge of the door.

Other

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

Recently Viewed Hardware

Customer Reviews

4 Stars
Mr
High quality product, but the surface area you pull on to open the door is inadequate. Needs to be a little deeper or a smaller angle to give you an area to grip.
Did you find this helpful?  8 of 8 Found Helpful
Reviewed by:  from Weatherford,tx. on 12/26/2015
4/5
1 Stars
Nice looking but needs re-engineering
Installed on Friday. Great fit and finish. The glaring problem with this pocket door hardware is that for whatever reason, they designed it with a bevel between the door-level surface and the recessed area. The result is that excessive inward finger force is required to open or close the door using the recess. I would not buy this design again.
Did you find this helpful?  7 of 9 Found Helpful
Reviewed by:  from WI. on 7/24/2011
1/5
5 Stars
emtek review
This was a replacement for a laquered lock that was worn. It fit perfectly and took about 10 minutes to install. Fit and finish are durable and heavy and works great.
Did you find this helpful?  3 of 4 Found Helpful
Reviewed by:  from malta,ny. on 4/19/2013
5/5
3 Stars
Mr
Easy enough to install. Great look vs. box store pocket hardware. Finish on screws easily comes off though. Locking turnscrew could be slightly bigger and the inset is rounded making sliding the door open a bit difficult thus having to push against the door to open. Overall a good product.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Edmonton. on 1/24/2016
3/5
5 Stars
Owner
Good quality pocket door lock.
Did you find this helpful? 
Reviewed by:  from Arlington. on 3/20/2018
5/5
5 Stars
Mrs.
Excellent fit and finish. Exactly what it was supposed to be.
Did you find this helpful? 
Reviewed by:  from 1228 Cloverdale Dr. Richardson, TX 75080. on 6/13/2010
5/5

[productqa_] Questions and Answers

Question where can we buy in England please?
Asked by: david - 5/29/2016
Question I couldn't tell you where in England these can be purchased, but we can ship to England. Answer provided by:  Jake (5/29/2016)
Question Is it possible to get brass finish on one side and brushed nickel on the other?
Asked by: Chas - 4/4/2017
Question Unfortunately not with this set. You would need to order one of each finish and mix the parts. Answer provided by:  Jake (4/4/2017)
Question The width of the door is 1 1/3 inches. Is this to wide for the door; it appears so. Can you recommend an alternative product?
Asked by: JR - 7/17/2017
Question A door 1 1/3" thick would make it roughly 1 5/16" thick? I think this would probably work. Most all pocket door hardware like this is designed for doors 1 3/8" - 1 3/4" thick as that is what most people have. I would think there is 1/16" play in that measurement. Answer provided by:  Jake (7/17/2017)
Question Hi My door is 1 3/8 inches will this fit? Also does this come with the scratch plate?
Asked by: JR - 7/17/2017
Question Yes, it will fit that door thickness. Yes it does come with a strike plate. Answer provided by:  Jake (7/17/2017)
Question Can you unlock the door easily from either side with your fingers? Thanks
Asked by: phil - 9/5/2017
Question You can use your hand to engage the lock on the inside. From the outside, you will need to have a flathead screwdriver or something similar to use the emergency release. Answer provided by:  Jake L (9/5/2017)
Question I would like to order a couple of these locks but I would like to see sample of the metal finish choices. Do you have a sample sheet or a page on your website that would have the finish samples? Thanks, Kelly
Asked by: kelly - 10/29/2017
Question I'm sorry we don't have a sample sheet. Finishes can vary slightly from brand to brand. You can refer to the Emtek Norwich Knob for examples of Emtek's finishes. Just choose the different finishes on the finish menu and the image will display that finish. Answer provided by:  Jake (10/29/2017)
Question I am building a large home and will be using Emtek Hardware. Is there any additional discount available for a large quantity of EmTek Hardware?
Asked by: Danny Taylor - 8/3/2018
Question Give us a call or email us details of what you need. We may be able to discount additionally depending on qty. Answer provided by:  Jake (8/3/2018)
Question does this come with the jamb plate?
Asked by: Stephen sepaugh - 8/16/2018
Question Yes, this comes with a strike. Answer provided by:  Jake (8/20/2018)
Hello Guest, Login Hello Guest! Logout
Information