Most Popular Door Accessories
See All Door Hardware Brands >>
Most door hardware products are design to fit standard door preparation as illustrated on the left. If you have something different, please start with our hardware replacement guide at the link below.
Part Numbers for Emtek Modern Stainless 2x10 Multi-Point Trim - Configuration 4
Keyed American Cylinder - 14B1Non-Keyed Passage - 14B2Non-Keyed American Style Thumbturn Inside - 14B3Non-Keyed / Fixed Outside, Operable Inside - 14B4Dummy Pair - 14B5
NOTE: Patio Locksets DO NOT include internal latch mechanisms. Be sure to select correct configuration to match up with your brand of door so this hardware will be compatible. This set WILL NOT fit doors prepped with standard bore holes 2 1/8" Dia spaced 5 1/2" apart. These sets are designed for multi point locking doors that already have an internal mechanism.
Emtek Modern Multi Point locks are a great contemporary replacement for your multi point patio doors. The Stainless Steel Finish designed to last a lifetime with a sleek modern look.
Emtek Door Hardware Includes: - Set includes plates, handles, and cylinders (where applicable). - Sets fit standard door thickness of 1 3/4", specify if different.
Levers available for this set are shown below
Keyed with American Cylinder This function uses a thumbturn on the inside to lock or unlock the door, and requires a key for entry from the outside. This is most common for exterior patio doors that need to be locked.
Non-Keyed, Thumbturn Inside This function allows you to lock the door with a thumbturn on the inside, but you cannot unlock it from the outside. Access from the outside is only possible when unlocked with thumbturn from the inside.
Non-Keyed, Fixed Handle Outside This function is often used on the side of a french door that is generally not active. The inside lever is operable from the inside so that you can unlatch the door when you want both open, but the lever is fixed from the outside preventing it from being unlocked from outside.
Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.
Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.
