Need Help? Call Us Mon-Fri 9-5 Mtn Time: Call 307-886-9449
Or Text 307-275-9700

Emtek Arts & Crafts Entrance Handleset

10 Review(s) Write a Review Write a Review
Emtek Arts & Crafts Entrance Handleset
Emtek Arts & Crafts Handleset with Hammered Egg Knob - Oil Rubbed Bronze

Helpful Information

Fits Standard Door Prep Most common standard preparation for entry door handlesets.
Handle Measurement

NOTE: Single Cylinder Empowered Interior with Yale Access is a motorized smart lock upgrade that works with Yale Access and includes Yale Access Module, Wi-Fi Bridge and DoorSense. Does not include a key pad for the exterior. For Keypad exterior see Emtek Keyless Handlesets.


Part Numbers for Emtek Arts and Crafts Handleset

Single Cylinder - 4811
Double Cylinder - 4821
Dummy - 4801


Maximum door thickness for double cylinder handleset is 2 7/8"


Emtek Arts & Crafts Handleset Includes:

- Solid Forged Brass
- Complete set. Includes knobs and backplates for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request)
- Schlage C Keyway

- Standard 2 1/8" Bore, 1" Crossbore and 5 1/2" CC door prep.
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.

Technical Information:
Installation Instructions



Choose Options:

SKU :4811
Handleset Function help
Interior Knob or Lever Trim
Door Handing help
Select Backset help
Specify Door Thickness
Other Options
Retail Price: $481.00
Price (USD)$406.44

Custom assembled. Please allow 7-10 business days before shipping. Expedited options at checkout.

Order Help

Emtek Arts & Crafts Handleset is Available in the Following Functions

Single Cylinder Handleset
Emtek single cylinder handlesets are locked/unlocked with a key from the exterior and locked/unlocked from the inside of the home with a thumbturn. Single cylinder handleset are by far the most popular function of handle set.

Double Cylinder Handleset
Emtek double cylinder handlesets have a keyed lock on both sides of the handleset. This means that to exit or enter the door you must have a key to unlock the door. Some people use double cylinder handlesets on glass doors where they are concerned that someone may be able to break the glass and unlock the door from the inside. The disadvantage of using a double cylinder handleset is that in the event of an emergency you would have to locate the key to unlock the door and get out of the building. For this reason we recommend the single cylinder handleset for most applications.

Dummy Handleset
If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handle sets. For the active side, you'll need a single or double cylinder handleset. For the inactive door, you'll want to order a dummy handleset. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.

Add On: Emtek Interconnect device
Emtek offers an interconnect device as an available option for their active handlesets. The interconnect device connects the interior lever or knob with the deadbolt on an emtek handleset. When you turn the knob or lever the interconnect device retracts the deadbolt simultaneously to unlock the door. This is just an added convenience that is available, but not required.


Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.


Measurements for Emtek Arts & Crafts Entrance Handleset

Emtek Arts & Crafts Entrance Handleset Measurements

Recently Viewed Hardware

Customer Reviews

5 Stars
Absolutely amazing product!! Solid workmanship...the door installer thought this piece was of excellent craftsmanship too. I searched for months, all new door sets these days have lever handles. My house is over 130 yrs old...I couldn't find anything local. Found this site after searching for this identical product on a Canadian website. After the exchange rate and broker fees I ended up saving over $400.00. Amazing piece of jewelry for my house. Absolutely love this website and my door handle!!
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from Thunder Bay. on 1/17/2018
5 Stars
Home owner
Very attractive handle and extremely well made I would absolutely recommend this product
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by:  from West Chazy. on 6/20/2017
5 Stars
Very stylish, high quality handle set at a very fair price. Easy install and looks great
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from CA. on 11/8/2016
5 Stars
Nice Product at Reasonable Price
The handleset was received in good condition with excellent packaging. Looks great and installed fairly easily as a replacement for the original door hardware. Heavier duty construction. The web site was a great help in figuring out what we needed. .. . an a bonus was we were able to use our existing deadbolt cylinder in lieu of that furnished, thus using the original key.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Clarkesville, GA. on 1/21/2013
5 Stars
Emtek handle set / Black hinges
Have not installed handle set yet but will be doing so in the next few days. The product looks great and am looking forward to seeing it on my new french doors.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from South Pasadena, CA. on 5/19/2012
5 Stars
Emtek Arts & Crafts Entrance Handleset
Well made, beautiful product.We got the Oil Rubbed Bronze, and are very happy with it. It installed in our existing door with no problem. We will come back to for our next project, delivery was quick. Thank you!
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from New Jersey. on 8/30/2010
5 Stars
Nice hardware!
I purchased two of these locksets for my house and was pretty impressed by the quality for the money. The same set on a few other sites was $50.00 to $150.00 more. They are very heavy and solid and the lock mechanism is tight and precise. The only drawback is that you have to lock them from the outside with the key.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Duncansville. on 12/27/2009
4 Stars
Classy hardware
High quality and true to form. Arrived with a very small scratch but fortunately in a hardly seen corner.
Did you find this helpful? 
Reviewed by:  from ST PETERSBURG. on 12/30/2022
5 Stars
Quality product at a good value, it also came well packed with nice installation templates. They also kept me well-informed of delays due to current situations which was appreciated I’ll definitely order from them again.
Did you find this helpful? 
Reviewed by:  from Florida. on 10/20/2021
5 Stars
This was the exact match for replacing our existing door handle. The instructions an videos made it easy to install. Very well made and a perfect match for our oak craftsman door.
Did you find this helpful? 
Reviewed by:  from Sacramento. on 5/5/2020

[productqa_] Questions and Answers

Question Do you have the Emtek Arts and Craft Entrance Handleset in full length?
Asked by: Brian - 8/8/2015
Question Sure we do. You can find the Arts and Crafts Full Length Style here:

Arts and Crafts Full Length Answer provided by:  Jake (8/10/2015)
Question does this work with 6 inc centers?
Asked by: doug - 8/21/2015
Question It does not. 5-1/2" inch center to center bore holes for this one. Answer provided by:  Josh (8/21/2015)
Question Does the $274 price include entry set and dummy set? How about dead bolt?
Asked by:  - 10/19/2015
Question There is a deadbolt lock integrated into this handleset. The price does not include the dummy handleset fo an inactive door. If you have double doors and you want a handleset on both doors you will need to buy 2 handlesets. The Emtek dummy is the same price as the active handleset.
Answer provided by:  Josh (10/19/2015)
Question Does the latch have to be centered between front and back of door or can it be shifted in one direction? I have an insulated door that has a double airlock, there is a step in the edge of the door and the stop (essentially making two stops). I'd like to have the latch be closer to the inside of the door so that it isn't located in the middle of this step. Is this possible? Any info would be great. Thank you
Asked by: Caleb - 12/16/2016
Question They are designed to have the latch centered because the two halves of the handle meet in the middle. There are certain situations where it can be made to be off center. Please give us a call and we can see if something can be done in your application. Answer provided by:  Jake (12/16/2017)
Question I'm confused i need left entrance and right dummy For a Dummy ?
Asked by: Perk - 4/29/2017
Question If you have a double door where the active side (looking at it from the outside) is on the left, you would need a left hand single cyinder and a right hand dummy. So you would add the active set to your cart, then come back and add the dummy set.

If all you need is the dummy set and looking at the door from the outside the dummy is on the right, then you would order a right hand dummy only. That would be one complete (inside and outside) dummy handleset for that door. Answer provided by:  Jake (4/29/2017)
Question Can this lock be keyed to match a Schlage key code? Thank you.
Asked by: Kay Bee - 8/20/2017
Question Yes, these use a schlage C keyway. We would just need to know your keycode when you place the order so we can key alike. Otherwise you could have it keyed locally. Answer provided by:  Jake (8/21/2017)
Question Does this come with the cylinder s?
Asked by: Jorgge - 9/18/2018
Question This handleset does come with the key cylinder, the latches, and all the needed strike plates and fasteners Answer provided by:  Josh (9/18/2018)
Question I currently have the MTech fighting crash hill in Luxor in oil rubbed bronze with a hammer effect. This block should be turned into an electronic lock or do you sell this design in an electronic lock either way I hate to get rid of it but I do need an electronic lock.
Asked by: Thomas Ryan - 12/3/2022
Question Unfortunately there is not a keyless option on this handleset. On an entry handleset the keyless portion is the deabdolt. So if you had a two piece handleset where the deadbolt is separate you could swap out the deadbolt for a keyless deadbolt. Since this one has a plate that encompasses the handle and the deadbolt - you would need to replace if you want a keyless set. Answer provided by:  Jake (12/5/2022)
Question I understand the lockset (see below) I’m looking to purchase states the spacing is 5-1/2”. The hole spacing on my door is 5-5/8”. Do you think this will be a problem? SKU :4811 / Part # 4811NWUS19-RH-238
Asked by: Tom Oakes - 6/3/2023
Question Hi Tom,

It's designed for 5 1/2" CC so we can't guarantee it will work, but it probably will. You may need to make some minor modifications to your bore hole or cross bores to get it all to align properly. A two piece style handleset for sure would work on that door prep. Answer provided by:  Jake (6/5/2023)
Hello Guest, Login Hello Guest! Logout