CaviLock CL400A Magnetic Passage Pocket Door Pull

CaviLock CL400A Magnetic Passage Pocket Door Pull

Like no other pocket door pull! The Cavilock magnetic passage pull, as the name suggests, is magnetized so that when the door is closed the magnetic strength keeps it attached to the strike.

The Cavilock CL400A Passage pull has a clean modern look. The wrap around style are easy to fit and don't require the complicated door prep that most high end mortise pocket door locks require. The perfect solution for commercial and residential applications on sliding or pocket doors. Popular solutions for hotels, offices and other commercial applications. Once installed on your door the low profile lockset allows the door to slide completely into the pocket with a sleek flush profile. Three different face plates are offered so you must specify your door thickness when ordering. For doors 1 3/8" - 1 1/2" (33-40 MM) the standard faceplate is used. For door 1 9/16" - 1 3/4" (40-45 MM)a wider faceplate is required and for doors 1 13/16"-2" (46-52mm)thick an oversized faceplate is needed.

- Measurements: 2 3/8" Wide, 1 1/8" Tall. 
- Available in Satin Chrome, Polished Chrome, Matt Chrome, Satin Nickel or Oil Rubbed Bronze
- Specify Door Thickness
- Deeper Finger cup than most brands with an easy to grab 90 degree angle edge.
- Built in finger pull on faceplate.
- Magnet produces a positive hold close.
- Simple cutout and installation instructions ensure a quick fitting.
- Moving parts sit flush until the door closes to minimize wear (no protruding striker).
- Suitable for pocket doors or barn, sliding door styles.

High quality CaviLock door hardware is made in New Zealand

Additional Information

Cavilock CL400A Magnetic Passage Pocket Door Pull Specs

Cavilock CL400A Installation Instructions

Manufacturer's Warranty