Need Help? We're Here Mon-Fri 9-5 Mtn Time: 307-886-9449
Or text 307-275-9700

Nostalgic Warehouse Rope Rosette with Black Porcelain Knob

0 Review(s) Write a Review Write a Review
Nostalgic Warehouse Rope Rosette with Black Porcelain Knob
Nostalgic Warehouse Black Porcelain Knob with Rope Rosette-Antique Brass

Helpful Information

Direct Door Hardware Shipping Timeframe for Nostalgic Warehouse Assembled Specifically to Your Chosen Options

Please Allow 7-10 Days Before Receipt. Need it Faster? Please Contact Us for Expedited Options


For a Mortise Skeleton Key Lock, see New York Knob with Rope


Nostalgic Warehouse Black Porcelain Door Knob with Rope Rosette

Nostalgic Warehouse reproduction black porcelain knobs are a great solution for obtaining that antique door knob look, with the convenience of components that fit modern style doors. Customize your black knob with multiple finishes above.

Black Porcelain Knob Specifications
- Top quality, forged brass knobs & plates
- Vintage designs - updated for modern us
- Engineered for use on Standard Prep pre-drilled doors
- Optional mortise-lock sets for antique doors
- Full Lifetime Warranty
- Limited Lifetime Mechanical Warranty
- Lifetime Finish Warranty
- Fits doors from 1 3/8" - 1 3/4" thick.

For exterior doors we recommend using a passage function knob in conjunction with a Nostalgic Warehouse Deadbolt above. Crystal or porcelain knobsets are not recommended for exterior use and are not covered under warranty if used for that purpose.

In the Box

Whats Included with Your Nostalgic Warehouse Black Porcelain Door Knob

Passage Door Knob Contents
A door knob and chosen rosette for both sides of the door, latch mechanism, strike plates and mounting screws.

Privacy Door Knob Contents
A doorknob and chosen rosette for both sides of the door, latch mechanism, generic unlocking tool, strike plates and mounting screws.

Double Dummy Door Knobs
Two non functioning doorknobs and chosen rosettes with mounting screws for surface mounting.

Note: Nostalgic Warehouse door hardware is shipped standard with square corner strike and faceplates. Rounded corner strike and faceplates are available upon request. Drive in latches also available upon request.

Choose Options:

Select Backset help
Retail Price: $150.00
Price (USD)$127.50

Assembled per order. Please allow 10-14 days before shipping


Order Help

Nostalgic Warehouse Black Porcelain Door Knob Functions

Nostalgic Warehouse door knobs are available in several functions. Please review the descriptions below so you can order the correct door door knob for your application.

Passage Door Knob Function Nostalgic Warehouse Passage or Hall and Closet Door Knobs are used on doors that do not require a locking mechanism. Halls, closets, pantry or laundry doors will generally use a passage knobset. Passage door knobs do not have a locking mechanism.

Privacy Door Knob Function Nostalgic Warehouse Privacy or Bed and Bath Door Knobs are most often used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Nostalgic Warehouse privacy door knobs have a push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some door knobs will have a pin hole inside a circular piece, some just have a small pinhole.

Double Dummy Door Knob Function Nostalgic Warehouse Double Dummy Door Door Knobs are sold in pairs. Dummy door knobs do not have a latch or mechanism of any kind. These door knobs are surface mounted to a door that has not been bored (large hole cut out) for a door knob. Dummy doorknobss are generally used on double doors that us a ball catch at the top to keep them closed so a latch is not required. They are also commonly found on the inactive side of a french door - a single dummy mounted on either side of the inactive door.


Nostalgic Warehouse warrants its products to be free from defects in materials and workmanship. This warranty is extended to the original user of Nostalgic Warehouse products as long as the User occupies the residential premises on which the Products were originally installed. For more information see the complete Nostalgic Warehouse Warranty.

Nostalgic Warehouse door hardware is assembled custom to fill your order. As a result there is a 25% restock fee assessed on all orders because the items have to be disassembled upon return. Nostalgic Warehouse Returns must be made within 30 days of the original purchase. Please contact us before return.

Recently Viewed Hardware

Questions and Answers

Question I would like to use a backplate that is 1 3/4 wide with my modern door and a porcelain handle. This door knob would work, but I want to use the rectangular antique backplate that matches our other doors. Do you have any suggestions to cover the difference between the 2 1/4 round hole that the mechanism must be put in and the 1 3/4 antique backplate? Does the rosette on this knob have to be used?
Asked by: Karen - 8/26/2017
Question These are designed to be used with Nostalgic Warehouse rosettes. They might work with a rosette you already have, but they might not. If you want to use a rosette that is smaller than the hole bored in your door you would need to patch the door, or have something custom made to cover it up. I suspect you'd pay more for something custom than just replacing the door (assuming its a standard type door). Answer provided by:  Jake (8/28/2017)