Need help finding the right Door Hardware for your application? We'd love to help. Our showroom hours are Monday - Friday 9-5 Mountain time. Give us a call or send us an email by clicking on the contact us link below.
Door Hardware Basics
Most door hardware will fit the following door preparation. If you have something different, please contact us so we can help you find exactly what you need.
Solid Forged Brass: Entrance handle, cylinder collar, knob, rose, and turn piece are manufactured of solid forged brass for maximum strength and durability.
Installation: Images lock sets are designed fo easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installation fast.
Door Thickness : Lock sets accomodate a door thickness of 1-3/4". Conversion kit available for 2" and 2-1/4" thick door.
Case: Deadbolt and latch case are formed of steel for strength. Most interior parts are made of solid brass or steel for maximum strength and smooth operation.
Backset: Adjustable backset 2-3/8" or 2-3/4" latch and deadbolt supplied standard.
Faceplate: Deadbolt and latch are supplied with a 1"(25mm) faceplate.
Strike: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ulimate strength and durability. The strike is installed with two 3" security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. The 3" screws securing the inside face of the double cylinder deadbolt resist tampering and guard against theft. Latches are supplied standard with a box strike
Bolt: Deadbolt and latch bolt are constructed of solid brass. Deadbolt has 1" throw when extended and a hardened steel insert for maximum security and protection. Latch bolt has a .5" throw when extended to fully engage the door jamb.
Fully Reversible: Accomodates most door conditions and facilitates installation.
Distance Between Latch and Deadbolt: Lockset accommodates any center-center spacing greater than 4-3/8".
Cylinder: Cylinder supplied with 5-pin keying. Cylinder is protected with free turning cylinder guard to resist gripping or twisting.
Keying: All keyed entry products are available keyed alike.
Door Prep: Designed to fit 2-1/8" face bore with no additional hardware.
* Hand-relieved finish variances: Product finishes which are HAND-RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.
Baldwin Images Handleset Functions
This handleset is available in three different functions which include:
Single Cylinder Entrance: From the exterior of the door the thumbpiece operates the handleset latch and the key operates the deadbolt. From the interior side of the door the knob/lever operates the handleset latch and a thumbturn operates the deadbolt.
Double Cylinder: From the exterior of the door the thumbpiece operates the handleset latch and the key operates the deadbolt. From the interior side of the door the knob/lever operates the handleset latch and the key operates the deadbolt. This option is not recommended for most exterior doors because if there is an emergency, occupants would have to search for a key before being able to escape.
Full Dummy: Dummy trim is for non-working side of double doors. Matching dummy trim (non-functioning) handleset and interior trim.
All Baldwin items are subject to 25% restocking fee when returned. Baldwin products are custom assembled per order and often times special ordered as per your selections. When items are returned they have to be disassembled and insected to make sure they are re-sellable and have all screws and mounting hardware.
How do I get replacement products for items covered by your warranties? If you are the original consumer purchaser, currently own the product, and have proof of purchase, call our Customer Service Department toll-free at 1-800-437-7448 to order replacement parts. Customer Service Representatives are available to assist you between 8 a.m. and 5 p.m. Eastern time Monday through Friday.
What is covered by your warranty for products that are not finished with The Lifetime Finish from Baldwin? Limited Finish Warranty- The finish on Baldwin products (excluding Lifetime Finish and living finish products) is protected by a durable topcoat designed to maintain the beauty and quality of the Baldwin product. The Baldwin Limited Finish Warranty covers the original purchaser for five years from date of purchase for interior use, and one year for exterior use. Living Finishes- Due to the nature of Baldwin living finish products, they will wear over time and may already have begun the process before reaching your home. No finish warranty is offered on living finish products, which are designed to age and improve over time. Living finishes include raw brass, oil rubbed bronze, stainless steel, and other non-lacquered or non-PVD finishes. See exclusions, remedies, warranty claims, and limitation of liabilities for further information.
What does your Lifetime Limited Mechanical Warranty cover? Subject to the terms and conditions of the Lifetime Limited Mechanical Warranty, Baldwin warrants to the original consumer purchaser that each of Baldwin's products shall be free from mechanical defects for the lifetime of the applicable product as long as the original consumer purchaser owns the product. (See exclusions, remedies, warranty claims, and limitation of liabilities for further information.)
Do your warranties cover labor? The Limited Lifetime Finish Warranty, Limited Finish Warranty, and Lifetime Limited Mechanical Warranty do not cover labor costs.
Measurements for Baldwin Bethpage Entrance Handleset