Handlesets

NOTE: When ordering handle sets, please be sure to order the same brand door handle as the rest of your doorknobs if you want them keyed alike.

NOTE: When ordering handle sets, please be sure to order the same brand door handle as the rest of your doorknobs if you want them keyed alike.

Single Door Entry

Usually if you have just one door, you'll want a handleset with a single cylinder deadbolt. The deadbolt will lock with a key on the outside and lock or unlock with a thumb turn on the inside. If you have a glass front door, you'll want to consider the double cylinder deadbolt handleset as described below.

Glass Entry Door

It is not uncommon for a home to have a full or even half glass front door. In this case, many people prefer to install a double cylinder deadbolt. A double cylinder deadbolt is keyed on both sides. Rather than have a thumb turn on the inside, it has a keyhole like the outside does. The reason people like these is that if a burglar were to break the glass, they wouldn't be able to unlock the door. Keep in mind that this is not always recommended, as you wouldn't be able to get out of the home quickly in the event of a fire since you'd have to find the key to unlock the door. These should only be used where there is another escape route easily accessible.

Double Door Entry

If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handlesets. For the active side, you'll need a handleset with a single cylinder deadbolt. Usually, the active side will close and latch to the inactive side and the deadbolt is latched into the inactive door edge. For the inactive door, you'll want to order a dummy handleset. This provides the look of a complete working set without the mechanisms - perfect for an inactive door.

With handleset options from Emtek, Grandeur, Baldwin, and more, find the right handleset in the finish and style to complete your doors. Should you have any other questions about our inventory of door handlesets, feel free to call us at 307-886-9449 or text 307-352-9449 for more information.

Handlesets Frequently Asked Questions

How do I replace my existing handleset?

Not all handlesets are made with the same measurements. If you are replacing an existing handleset, you might find our handleset replacement guide helpful. Our guide will walk you through the measurements you need and help you find handlesets that match or are closest to your measurements.

What kind of handleset do I need for a single door entry?

Usually if you have just one door, you'll want a single cylinder handleset. The way this works is the deadbolt portion of the handle will lock with a key on the outside and lock or unlock with a thumb turn on the inside. If you have a glass front door, you might want to consider the double cylinder deadbolt handleset as described below.

What kind of handleset would I install on a glass door?

It is not uncommon for a home to have a full or even half glass front door. In this case, many people prefer to install a double cylinder deadbolt. A double cylinder deadbolt is keyed on both sides. Rather than have a thumb turn on the inside, it has a keyhole like the outside does. The reason people like these is that if a burglar were to break the glass, they wouldn't be able to unlock the door. Keep in mind that this is usually not recommended, as you wouldn't be able to get out of the home quickly in the event of a fire since you'd have to find the key to unlock the door. These should only be used where there is another escape route easily accessible.

How do I order handlesets for a double door?

If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handlesets. You'll need a single cylinder handleset for the active door, and then a dummy handleset for the inactive (fixed) door. The dummy handleset will give you the same look as the active handle, but does not have working latch parts. Typically the cost of a dummy handleset is the same or very close to the cost of the active set. To order, find the style you like. First, make your selections and add the single cylinder handleset to your cart, then go back and add the dummy function to your cart.

Can I get a handleset with two locks on it?

Yes, we do have two-point locks available. Two-point locking handlesets require special door prep which can vary according to brand. While most handlesets lock with a deadbolt at the top, a two-point locking handleset will lock with the deadbolt as well as a lock mechanism in the handle. You can click here to see our two-point lock handlesets.

What is the difference between a tubular latch handleset and a mortise handleset?

Tubular latch handlesets are the most common and have two tubular shape latches - one for the deadbolt and one for the handle latch. Doors set up for these handlesets have two 2 1/8" bore holes spaced at 5 1/2" center to center with 1" cross bores. This is illustrated in this graphic below.

Mortise handlesets use a large mortise lock box instead of separate latches. So the deadbolt and handle latch are incorporated in the same box. This mortise boxes require that you mortise a rectangular hole in the edge of the door roughly 6 3/8" tall, 3 1/2" deep. There are also a series of holes of varying sizes (depending on the brand of mortise lock) that are drilled on the surface of the door.

Mortise handlesets have a much nicer feel, but they also cost significantly more than tubular latches. You wouldn't use a mortise handleset unless you are replacing an existing set, or have a brand new door that can be prepped the appropriate way.