EZSet F Series SD Lever Grade I Classroom Function Commercial Lockset

EZSet Focus Style Commercial Leverset

Applications - For offices, schools, hospitals, apartments, hotels, motels and other public buildings.

Features for this commercial lever:
Schalge C Keyway Finishes: US10B (Oil Rubbed bronze) US26D (Satin Chrome) Functions: Keyed, Storeroom, Classroom, Privacy, Passage and Dummy Fast and Easy Installation		Clutch Function Independent return springs Removable through bolt.
Specification for this Commerial Lever:
Door ranges: 1 3/8" - 2" Door thickness (35-51MM) Front: 2 1/4" x 1 1/8", adjustable for beveled doors 1/8" in 2". Latchbolt: 1/2" throw stainless steel latch bolt (12.7 MM) RH or LH applications. Meet UL 3 Hours fire rating, UL file No. R13776 ANSI Standards - Meets or exceeds requirement of BHMA/ANSI A156.2, Series 4000 Grade 2, 400,000 Cycles. Exposed trim: Wrought Brass, bronze or stainless steel, levers are zinc casting, plated to match trim finish.		Backset: 2 3/4" (70mm) Standard, or 2 3/8" (60mm) Strike: ASA strike standard.  Strike box available upon request. Latch and strike Screws: 8-32 x 1" FPH Dual Purpose Federal Standard: Meets FF-H-106C Keying 6 Pin Tumbler Cylinder, 2 keys per lock. Keying available upon request. keying charge may apply depending on quantity and complexity of keying.
	Meets ADA requirements. Specially designed for barrier free application.		Conforms with ANSI A156.2. Series 4000, Grade II Exceeds 800,000 Cylces. Meets A117.1 Accessibility Code.

Entrance, Passage and Privacy Doorknobs:
- Two knobs (one for each side of the door).
- Strike Plate (mounted on the Jamb across from the strike).
- Mounting screws.
- Tubular latch with attached mortise plate.

*Entrance knobs also include keys. Larger orders keyed alike may not have keys included with every entrance knobset.

Dummy Knobsets:
Single
- One knob and rosette to be surface mounted to the door.
- Mounting screws.

Not Sure Which Function You Need?

Commercial door hardware is available in several functions to meet the requirements of your application. Below is an explanation of each function available in this lever. To order other functions and deadbolts check out the related products.

EXAMPLE		USE OR FUNCTION
		Entrance Keyed Locks - Turn Push button locking. Pushing and turning the button disengages outside lever requiring use of key until the button is manually locked. Push Button Locking - pushing the button disengages the outside lever until unlocked by key or by turning the inside lever. Clutch function is designed to disengage outside spindle from latch when in locked condition.
		Storeroom Lock - Outside lever is always disengaged. Enter by key only. Inside lever is always unlocked. Clutch function is designed to disengage outside spindle from latch when in locked condition.
		Classroom Lock - Outside lever disengaged and unlocked by key. Inside lever always unlocked. Clutch function is designed to disengage outside spindle from latch when in locked condition.
		Privacy Lock - Inside push button locks outside. Outside unlocked in emergency coin slot. Inside always free (unlocked).
		Passage Set - Both outside and inside always unlocked. No locking mechanism.
		Single Dummy Lever - Dummy lever handles mount to the surface of the door. This is the perfect solution for ball catch doors or other applications where a latch mechanism is not needed, but the look of a leverset is desired. Dummy lever handles are used on doors that do not have a bore hole in them already. If your door is prepped with a bore hole, this function will not work.

EZSet Limited Product Warranty

EZSET Residential lockset come with a lifetime mechanical and 5-year finish warranty. This warranty is extended to the original purchaser, warranting that the lock shall be free from defects in material and workmanship, other that normal wear to the lock. This warranty does not cover scratches or abrasions; abuse or misuse; deterioration due to the use of paint, solvents, or any other chemicals; or residential products used in commercial applications. Upon return of a confirmed defective product with an original paid receipt, the manufacturer shall either repair or replace the product. Under this warranty the manufacturer nor the supplier shall not be responsible for; any cost of removing the old lock, installing the new lock or any other additional costs.