Most Popular Door Accessories
See All Door Hardware Brands >>
Need help finding the right Door Hardware for your application? We'd love to help. Our showroom hours are Monday - Friday 9-5 Mountain time. Give us a call or send us an email by clicking on the contact us link below.
Door Hardware Basics
Most door hardware will fit the following door preparation. If you have something different, please contact us so we can help you find exactly what you need.
Door Hardware Help
Part Numbers for Emtek Sandcast Arched 1 1/2 x 11 Multi-Point Trim - Configuration 2
Keyed American Cylinder - 1211Non-Keyed Passage - 1212Non-Keyed Thumbturn Inside - 1213Non-Keyed / Fixed Out Operable In - 1214Dummy Pair - 1215
NOTE: Patio Locksets DO NOT include internal latch mechanisms. Be sure to select correct configuration to match up with your brand of door so this hardware will be compatible. This set WILL NOT fit doors prepped with standard bore holes 2 1/8" Dia spaced 5 1/2" apart. These sets are designed for multi point locking doors that already have an internal mechanism.
Emtek Configuration 2 Sandcast Arched 1 1/2" x11" Multi Point Lock Specs
Emtek Sandcast Bronze Door Hardware is made of solid bronze cast into authentic rustic designs. Patina finishes are achieved using traditional techniques of the sculptor.
Emtek Door Hardware Includes: - Set includes plates, handles, and cylinders (where applicable). - Sets fit standard door thickness of 1 3/4", specify if different.
Available levers shown at bottom of page
Keyed with American Cylinder This function uses a thumbturn on the inside to lock or unlock the door, and requires a key for entry from the outside. This is most common for exterior patio doors that need to be locked.
Non-Keyed, Thumbturn Inside This function allows you to lock the door with a thumbturn on the inside, but you cannot unlock it from the outside. Access from the outside is only possible when unlocked with thumbturn from the inside.
Non-Keyed, Fixed Handle Outside This function is often used on the side of a french door that is generally not active. The inside lever is operable from the inside so that you can unlatch the door when you want both open, but the lever is fixed from the outside preventing it from being unlocked from outside.
Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.
Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.