Emtek Multi Point Patio Door Lock Trim - Configuration 5 Cast Bronze Tuscany 2x10

Emtek Configuration 5 Cast Bronze Tuscany 2X10 Multi Point Lock Specs

Emtek Sandcast Bronze Door Hardware is made of solid bronze cast into authentic rustic designs. Patina finishes are achieved using traditional techniques of the sculptor.

Emtek Door Hardware Includes:
- Set includes plates, handles, and cylinders (where applicable).
- Sets fit standard door thickness of 1 3/4", specify if different.

NOTE: Patio Locksets DO NOT include interior guts. Be sure to select correct configuration to match up with your brand of door so this hardware will be compatible.

Available levers shown at bottom of page


Finish Samples

Deep Burgandy	Medium Bronze	Silver Patina	Flat Black

Lost Wax multi point locks are available with the following lever options:


Art Nouveau Lever	Octagon Lever	Medici Lever	Napoli Lever

Padua Lever	Dakota with Black Leather	Dakota with Brown Leather

Emtek Multi Point Lock Functions

	Keyed with American Cylinder This function uses a thumbturn on the inside to lock or unlock the door, and requires a key for entry from the outside. This is most common for exterior patio doors that need to be locked.
	Non-Keyed Passage Non keyed passage functions are for patio doors that do not need to lock at all, but levers are needed for operating the latch mechanism.
	Non-Keyed, Thumbturn Inside This function allows you to lock the door with a thumbturn on the inside, but you cannot unlock it from the outside. Access from the outside is only possible when unlocked with thumbturn from the inside.
	Non-Keyed, Fixed Handle Outside This function is often used on the side of a french door that is generally not active. The inside lever is operable from the inside so that you can unlatch the door when you want both open, but the lever is fixed from the outside preventing it from being unlocked from outside.
	Dummy This function would be used on the side of a french door where the door is not active, or does not use a multi point mechanism to keep it closed. Dummy functions are purely for cosmetic reasons and really have no function.

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

Emtek Configuration 5 Lost Wax Bronze Tuscany 2X10 Multi Point Lock