Emtek 14 Style DoubleCylinder Deadbolt

Available Finishes

	Deep Burgundy
	Flat Black
	Medium Bronze
	Silver Patina

NOTE: Lost Wax finishes are "living finishes" and are designed to wear over time.

Emtek #14 Double Cylinder Deadbolt

Emtek Double Cylinder deadbolts have a keyed cylinder on the outside as well as on the inside.These deadbolts are generally used on doors that are partly glass incase an intruder breaks the glass, the door requires a key to unlock it. It is not recommended on most doors because it increases the danger of a person to escape incase of a fire. Emtek Lost Wax door hardware is made of solid cast bronze for heavy feel and lasting quality.

Emtek #14 Double Cylinder Deadbolt Specs

- Schlage keyway
- Standard door prep
- Solid brass cylinder, housing collar and rosette.
- Hardened steel bolt
- Heavy guage steel understrike and brass trim strike shipped with every deadbolt.
- Backsets are non-adjustable. Please specify backset when ordering.
- Shipped with square corner strike and mortise plates. Rounded corner plates or drive in latches available upon request.

You might also like:

Emtek #14 Style Single Cylinder Deadbolt
Emtek #14 Style Single Sided Deadbolt

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

Emtek #14 Style Double Cylinder Deadbolt Measurements