Weslock Hillcrest Handleset

Entry Handleset Specifications

- Limited 10 Year Mechanical Warranty
- Limited 5 Year Finish Warranty
- 5-pin cylinder
- Half moon spindle tubular design
- Adjustable latches 2 3/8" or 2 3/4" with radius faceplates and strikes
- Adjusts to door thickness from 1 3/8" to 2"
- Entry handle fits doors prepared with 2 1/8" top (1 5/8" optional) and 2 1/8" bottom cross hole and 1" edge holes
- Knob/Lever fits door prepared with 2 1/8" cross hole and 1" edge hole

Available Finishes

Satin Nickel	Oil Rubbed Bronze

Click here to learn how to determine the handing of your door.
Not sure which handle set you need?
**Due to high demand this item may not ship immediately. Please call for availability.

The Weslock Hillcrest Handleset Includes

- Both the inside lever or knob trim and the outside handleset in the finish of your choosing.
- Latches for the upper deadbolt portion as well as the handle.
- Rounded and square corner faceplates and strike plates.
- Mounting screws and other hardware.
- Keys (For Single and Double Cylinder handlesets.

The Weslock Hillcrest Handleset is Available in 2 Functions:

Single Cylinder Handleset
Single Cylinder handlesets are locked/unlocked with a key from the exterior and locked/unlocked from the inside of the home with a thumbturn. (most often used)

Dummy Handleset
If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handle sets. For the active side, you'll need a single or double cylinder handleset. For the inactive door, you'll want to order a dummy handleset. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.

Double Cylinder Handleset
A double cylinder handleset has a keyed cylinder on the inside as well as the outside. This requires a key to lock or unlock the door from both sides. We don't recommend using double cylinder handlesets on main exterior doors because if there is any emergency, a key would be required to exit the home.

How to Determine Door Handingfor a Weslock Castletown Handleset

When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly.



Follow These Steps:

	Stand facing the door on the outside - If it's a locking door, stand on the side of the door where you would insert a key (or unlocking tool if it would be a privacy lock).

	If the hinges are on the left, it's a left hand door. If the hinges are on the right, it's a right hand door.

Weslock Hillcrest Entrance Handleset