Construction of Weslock Doorknobs
Weslock doorknobs, lever handles, and handlesets are made of various high quality materials: solid molten bronze, solid brass and die cast zinc depending on the series you choose. Great warranty coverage also varies by series. Deadbolts include 1" throw and hardened steel rollers to prevent sawing. Weslock knobs are built well to last through years of use.

Weslock Door Knob Functions
Weslock doorknobs are available in several functions the most common being keyed entry, privacy (bed and bath), passage (hall and closet) and single dummy. Each function is used for little different application.

Keyed Entry
Weslock keyed entry doorknobs use a 5-pin keyway and meet ANSI A 156.2 grade II lock standards. Keyed entry knobsets have a push button on the interior rosette to lock and unlock the door. One turn of the interior knob unlocks and opens the door. Unlock from the outside using a key. The knobset is only locked when the push button is in the locked position.

Privacy Knobsets
Weslock privacy locksets work just like the keyed entry knobsets, but you do not need a key to unlock from the outside. There is no key cylinder, but there is a pinhole through which you can unlock the door using the generic tool provided. Privacy locks are generally used on bedroom or bathroom doors.

Passage Knobsets
Weslock passage doorknobs are non- locking. These are great for hall doors or closet doors that do not need to lock, but a latching mechanism is still required.

Single Dummy
Weslock dummy knobsets are sold individually as a single dummy. These are non-functioning knobs that are mounted to the surface of the door. These are used on doors that do not need a latch mechanism like the inactive side of a french door for example.

Door Prep for Weslock Doorknobs
	As mentioned previously, Weslock doorknobs are packaged with square and rounded corner latch faceplates and square and rounded corner strike plate for easy intallation to your specific door preparation. Below are some other measurements to consider: - 2 1/8" Diameter bore hole. - Backset of 2 3/8" or 2 3/4" - 1" diameter cross bore.