Weslock Castletown Handleset

The Weslock Castletown Entrance Handleset is made from a pitted, worn and rustic molten bronze material and is available in three finishes. Choose from several knob and lever styles for the interior.

Entry Handleset Specifications

- Limited Lifetime Manufacturer's Mechanical Warranty - Removable knobs/levers prevents scratching during installation - Solid molten bronze - 1" throw deadbolt with two hardened steel rollers - prevents sawing - Meets ANSI A 156.2 Grade II lock standards - 5-Pin Cylinder - Weslock keyway standard (optional Schlage keyway) - 2 piece interior escutcheon - 5-1/4" Minimum Center to Center Determine the handing of your door. Please allow 3-5 days before shipment.

Available Finishes Oil Rubbed Bronze Weathered Pewter Black

Inside Knob and Lever Options
Durham	Wexford	Carlow	Monoghan	Waterford Lever

The Weslock Castletown Handleset Includes

- Both the inside lever or knob trim and the outside handleset in the finish of your choosing.
- Latches for the upper deadbolt portion as well as the handle.
- Rounded and square corner faceplates and strike plates.
- Mounting screws and other hardware.
- Keys (For Single and Double Cylinder handlesets.

Dummy Handleset
If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handle sets. For the active side, you'll need a single or double cylinder handleset. For the inactive door, you'll want to order a dummy handleset. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.

How to Determine Door Handingfor a Weslock Castletown Handleset

When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly.

Follow These Steps:
	Stand facing the door on the outside - If it's a locking door, stand on the side of the door where you would insert a key (or unlocking tool if it would be a privacy lock).
	If the hinges are on the left, it's a left hand door. If the hinges are on the right, it's a right hand door.

Weslock 300 Series Double Cylinder Deadbolt Measurements

Weslock door hardware products are covered as long as the original purchaser owns or occupies the premises on which the product was installed. For complete warranty information see Weslock Warranty.

Weslock Castletown Handleset Measurements