Eastlake Doorknobs with Spindle
| |
Available Finishes |
 |
Polished Brass |
|
|
| Our high quality, forged brass doorknobs are not to be confused with cast imitations. All of our doorknobs are mounted on solid, forged brass bases, not brass plated. If you're restoring a historic building, or just your home, our doorknobs may fit right into your existing back plates. |
IMPORTANT INFO YOU MUST KNOW! - These antique knobsets are sold as KNOBS ONLY with a spindle! Interior functions (latches, strike plates, etc.) are not included with these knobsets. This type of vintage door hardware is most often used when you have an older home that needs replacement knobs but not necessarily new functions. These knobs are meant to replace your old existing knobs that use the spindle and set screw design, but we do not guarantee they will fit as there are many brands of hardware that each have their own design. Please take measurements of your existing antique hardware to make sure you order the right size spindle. Nostalgic Warehouse Antique hardware is subject to a 20% restock fee. |
| |
| Antique Door Hardware Details |
- 2 Steel Allen-head set screws (used to attach knob to spindle)
- Base Diameter - Approximately 16mm
- All knobs are sold in pairs (2 knobs) and include the spindle type you select. |
| Spindle Details |
| You may specify which kind of spindle you need. Whether you have a vintage Mortise Lock, or a standard Passage, Privacy or Dummy knob. We have a spindle that will work for you. Please refer to spindle options below. |
 |
- Standard spindle measures 4 1/4" x 8mm
- Privacy spindle has an adjustable length x 8mm
- Dummy spindle (for non-functioning doorknob) 1 1/8" x 8mm
- Mortise spindle measures 3 1/2" x 7mm (used with an antique mortise lock) |
|
