Hello Guest Login

Flush Pulls

Bypass Flush Pulls

Bypass door pulls or flush pulls are a simple recessed pull used on bypass doors. Called flush pulls because they are flush with the surface of the door, these pulls allow doors to slide in front of one another without getting hung up on the door hardware. Flush pulls are available in many styles, including some that fit right inside a standard bore hole of 2 1/8". Flush pulls are most often used on bypass closet doors where the distance between the two doors is very minimal. Flush pulls generally don't protrude from the door mare than 1/8 of an inch and vary in depth. Generally the depth is around 1/2 Inch or more, just enough to enable you to push or pull the door closed with your fingertips. If your door actually slides into a wall cavity, flush pulls are not necessarily the best option. For pocket doors, see our pocket door hardware section.

Products (Total Items: 58)
Sort by:
More results: 1 2 3 Next View All
Inox Oval FHIX04 Flush Pull
FHIX04
Average Rating(0)
$10.20
    Inox Rectangular FHIX06 Flush Pull
    FHIX06
    Average Rating(0)
    $10.20
      Baldwin Edge Pull - BR7012
      9BR7012
      Average Rating(2)
      $10.50
        Emtek Square Flush Door Pull
        2213
        Average Rating(0)
        $11.76
          Emtek Rectangular Flush Door Pull
          2201
          Average Rating(1)
          $11.76
            Emtek Round Flush Door Pull
            2211
            Average Rating(0)
            $11.76
              Inox Round FHIX02 Flush Pull
              FHIX02
              Average Rating(0)
              $14.45
                Linnea Flush Pull RPS-40
                RPS-40
                Average Rating(0)
                $15.00
                  More results: 1 2 3 Next View All
                  Hello Guest, Login Hello Guest! Logout
                  Information
                  Categories