Hello Guest Login

Emtek Sandcast Ridgemont Grip by Grip Handleset

Custom assembled per order. Please allow 7-10 Business days before shipping. Call 307-886-9449 for expediting options.

Emtek Sandcast Ridgemont Grip by Grip Handleset

review
0
0
5
Emtek Sandcast Ridgemont Grip by Grip Handleset
Emtek Creston Grip by Grip Handleset

Helpful Information

Fits Standard Door Prep Most common standard preparation for entry door handlesets.
- Ships with 2 1/4" tall standard strike.

Part Numbers

Part Numbers for Ridgemont Grip by Grip Handleset

Single Cylinder - 453727
Double Cylinder - 454727
Dummy - 455727

Note:

Maximum door thickness for double cylinder handleset is 3"

Description

Emtek Ridgemont Grip by Grip Handleset Includes:

  • Standard door preparation
  • 5-1/2" center to center
  • Backset must be specified upon order placement -- either 2-3/8" or 2-3/4" backsets.
  • Complete set. Includes exterior and interior handles, latchset, deadbolt, and mortise/strike plates.
  • Shipped with Mortised tubular latch (drive-in latches are available upon request).
  • Shipped with Square corner mortise plates and strike plate. Rounded corner available upon request.

Finish Options

Emtek Medium Bronze Medium Bronze
Emtek Flat Black Flat Black
Emtek White Bronze White Bronze

Part#

Interior of single cylinder handleset will have thumbturn on deadbolt rather than cover flap as shown in image above

Choose Options:

SKU:E270
Handleset Function help
Door Handing help
Finishes
Select Backset help
Specify Door Thickness
Price$576.00

Custom assembled per order. Please allow 7-10 Business days before shipping. Call 307-886-9449 for expediting options.

Order Help


Emtek Ridgemont Grip by Grip Handleset is Available in the Following Functions

Single Cylinder Handleset
Emtek single cylinder handlesets are locked/unlocked with a key from the exterior and locked/unlocked from the inside of the home with a thumbturn. Single cylinder handleset are by far the most popular function of handle set.

Double Cylinder Handleset
Emtek double cylinder handlesets have a keyed lock on both sides of the handleset. This means that to exit or enter the door you must have a key to unlock the door. Some people use double cylinder handlesets on glass doors where they are concerned that someone may be able to break the glass and unlock the door from the inside. The disadvantage of using a double cylinder handleset is that in the event of an emergency you would have to locate the key to unlock the door and get out of the building. For this reason we recommend the single cylinder handleset for most applications.

Dummy Handleset
If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handle sets. For the active side, you'll need a single or double cylinder handleset. For the inactive door, you'll want to order a dummy handleset. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.

Add On: Emtek Interconnect device
Emtek offers an interconnect device as an available option for their active handlesets. The interconnect device connects the interior lever or knob with the deadbolt on an emtek handleset. When you turn the knob or lever the interconnect device retracts the deadbolt simultaneously to unlock the door. This is just an added convenience that is available, but not required.

Other

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

Measurements

Measurements for Emtek Sandcast Ridgemont Grip by Grip Handleset

Emtek Sandcast Ridgemont Grip by Grip Handleset Measurements

Recently Viewed Hardware

Questions and Answers

Question Does this really take 10-15 days to ship?
Asked by: Andrea - 6/7/2015
Question I'm sorry, all Emtek items are assembled per order and their standard lead time is about a week to 10 days before they ship out. So yes, they do take that long. For a fee, they will rush through assembly and overnight ship which typically gets it to you within 3-4 business days (they still havae to assemble the item). Please give us a call to order if you would like the item rushed.
Answer provided by:  Jake (6/8/2015)
Hello Guest, Login Hello Guest! Logout
Information
Categories