Hello Guest Login

Emtek Sandcast Rectangular Monolithic Handleset

Custom assembled per order. Please allow 7-10 Business days before shipping. Call 307-886-9449 for expediting options.

Emtek Sandcast Rectangular Monolithic Handleset

Emtek Discount Notice
Emtek Sandcast Rectangular Monolithic Handleset
Emtek Rectangular Monolithic Entry Handleset with Durango Lever - Flat Back

Helpful Information

Fits Standard Door Prep Most common standard preparation for entry door handlesets.
- Ships with 2 1/4" tall standard strike.

Part Numbers

Part Numbers for Emtek Rectangular Monolithic Handleset

Single Cylinder - 451512
Double Cylinder - 452512
Dummy - 450512


Maximum door thickness for double cylinder handleset is 2 5/8"


Emtek Sandcast Rectangular Monolithic Handleset Includes:

  • Standard door preparation
  • 5 1/2" center to center
  • Complete set. Includes exterior handle and interior backplate and knob or lever style chosen.
  • Shipped with Mortised tubular latch (drive-in latches are available upon request)
  • Shipped with Square corner mortise plates and strike plate. Rounded corner available upon request.
  • Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
  • Interconnect device available.

Finish Options

Emtek Medium Bronze Medium Bronze
Emtek Flat Black Flat Black
Emtek Tumbled White BronzeTumbled White Bronze

Emtek Sandcast Rectangular Monolithic Handleset is available with the following interior knob/lever options:

Emtek Aurora Lever
Aurora Lever

Emtek Cody Lever
Cody Lever

Emtek Cimarron Lever
Cimarron Lever

Emtek Durango Lever
Durango Lever

Emtek Montrose Lever
Montrose Lever

Emtek Teton Lever
Teton Lever

Emtek Bronze Egg Knob
Bronze Egg Knob

Emtek Butte Knob
Butte Knob

Emtek Winchester Knob
Winchester Knob

Choose Options:

Handleset Function help
Knob/Lever Style help
Door Handing help
Select Backset help
Specify Door Thickness
Other Options

Custom assembled per order. Please allow 7-10 Business days before shipping. Call 307-886-9449 for expediting options.

Order Help

Emtek Rectangular Monolithic Handleset is Available in the Following Functions

Single Cylinder Handleset
Emtek single cylinder handlesets are locked/unlocked with a key from the exterior and locked/unlocked from the inside of the home with a thumbturn. Single cylinder handleset are by far the most popular function of handle set.

Double Cylinder Handleset
Emtek double cylinder handlesets have a keyed lock on both sides of the handleset. This means that to exit or enter the door you must have a key to unlock the door. Some people use double cylinder handlesets on glass doors where they are concerned that someone may be able to break the glass and unlock the door from the inside. The disadvantage of using a double cylinder handleset is that in the event of an emergency you would have to locate the key to unlock the door and get out of the building. For this reason we recommend the single cylinder handleset for most applications.

Dummy Handleset
If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two handle sets. For the active side, you'll need a single or double cylinder handleset. For the inactive door, you'll want to order a dummy handleset. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.

Add On: Emtek Interconnect device
Emtek offers an interconnect device as an available option for their active handlesets. The interconnect device connects the interior lever or knob with the deadbolt on an emtek handleset. When you turn the knob or lever the interconnect device retracts the deadbolt simultaneously to unlock the door. This is just an added convenience that is available, but not required.


Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.


Measurements for Emtek Rectangular Monolithic Entrance Handleset

Emtek Rectangular Monolithic Entrance Handleset Measurements

Recently Viewed Hardware

Hello Guest, Login Hello Guest! Logout